303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Machine Systems Caterpillar


System Pressure - Release

Usage:

303.5E2 CR BG8

压力释放步骤

------ WARNING! ------

滚热的油或液压油的压力会对人员造成伤害。

发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。

卸下机具和其油路之前,必须先把机具放到地面上,让油先冷却,才可进行工作。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。


  1. 将所有机具降至地面。

  2. 关闭发动机。

  3. 将点火开关转到 ON 位置。 将控制台置于向下位置。 全行程移动操纵杆。 这将释放可能存在于先导系统中的任何压力。

  4. 缓慢松开液压油箱空气呼吸器盖,以释放压力。

  5. 上紧液压油箱空气呼吸器盖。

  6. 液压系统里的压力现在已经被释放。

Caterpillar Information System:

318E Excavator Systems Pilot System
320D Excavator Machine Systems Final Drive - Assemble
318E Excavator Systems Main Hydraulic System
Installation Procedure for the 384-2317 Coupler Control Arrangement {6129} Installation Procedure for the 384-2317 Coupler Control Arrangement {6129}
300.9D VPS Mini Hydraulic Excavator Machine Systems Cylinder Drift - Check
308E CR Mini Hydraulic Excavator Machine System Specifications Main Control Valve
2012/02/28 Boom, Stick, and Frame Groups Require Rework on Certain 312D, 315D, and 319D Excavator {0679, 4150, 6501, 6502, 7062}
Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F} Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F}
308E CR Mini Hydraulic Excavator Machine System Specifications Stick Cylinder
CB7, CB8 and CB10 Vibratory Asphalt Compactors Power Train Propel Lines
CB64B, CB66B and CB68B Asphalt Compactor Machine Systems Flood Lighting
308E2 CR Mini Hydraulic Excavator Machine System Specifications Stick - 2.21 m (7.251 ft)
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Assemble
CD44B and CD54B Vibratory Asphalt Compactors Propel System Piston Motor (Drum Propel) - Solid Drum
308E2 CR Mini Hydraulic Excavator Machine System Specifications Stick Cylinder
308E2 CR and 308E2 SR Mini Hydraulic Excavators Machine System Specifications Bucket Cylinder
308E CR Mini Hydraulic Excavator Machine System Specifications Swing Motor Lines
2012/02/15 Improved Routing for the Battery Cable Assembly is Now Used on Certain 345D and 349D Excavators {1401, 1402, 1408}
308E CR Mini Hydraulic Excavator Machine System Specifications Swing Drive
Product Identification Numbers (PIN) Location Guide Integrated Toolcarrier
308E CR Mini Hydraulic Excavator Machine System Specifications Swing Drive Mounting
318E Excavator Systems Solenoid Valve (Proportional Reducing) - Power Shift System
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Eccentric Weight
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.