C-10, C-12, C-15 and C-16 Industrial Engines Caterpillar


E015 High Engine Coolant Temperature Derate

Usage:

CPT372 1WZ
产生此代码的情况:

发动机已经运转 3 分钟,冷却液温度已经超过冷却液温度保护的减额触发点。

系统响应:

电子控制模块(ECM)会记录该事件。

Caterpillar 电子技师(ET)在状态屏幕上显示"发动机减额"。

ECM 将使发动机功率减额 12.5%。 冷却液温度超过 109 °C (228 °F) 时,ECM 最高可使发动机功率减额 25%。 发动机功率将以每秒 1% 的速率减额。

测试步骤 1. 检查监控系统参数

"发动机冷却液温度偏高"参数可能未正确编程设定。 使用 Cat 电子技师查看"发动机冷却液温度偏高"参数设定。 确保该参数设定适合具体的发动机应用。

预期结果:

"发动机冷却液温度偏高"参数编程设定正确。

结果:

  • 正常 - 发动机存在过热状况。

    修复: 请参阅系统操作/测试和调整, "冷却系统 - 测试"。

    停止

  • 异常 - 参数未正确编程设定。

    修复: 请参阅故障诊断与排除, "系统配置参数",了解"发动机冷却液温度偏高"参数可用的温度范围。确认修理已排除故障。

    停止

Caterpillar Information System:

PMG3516 Power Module Plate Locations and Film Locations
C-15 and C-16 Industrial Engines Fuel Transfer Pump
Exhaust Temperature Scanner System Description
G3516B and G3520B Generator Set Engines Camshaft - Install
2000/12/01 Correction to Testing and Adjusting Module, SENR5832, Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines {4490}
PMG3516 Power Module Specifications
797 Off-Highway Truck Power Train Rear Axle Housing
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Generator Monitoring System PLC Diagnostics
Marine Monitoring System II Performance Tests
Marine Monitoring System II Overspeed Verification Test
Marine Monitoring System II System Tests
725 and 730 Articulated Trucks Power Train Torque Converter
C-10, C-12, C-15 and C-16 Industrial Engines E027 High Inlet Air Temperature Warning
3126B Engine for Caterpillar Built Machines CID 0041 FMI 03 8 Volt DC Supply short to +batt
3054, 3054B and 3056 Marine Engines Cooling System
C-10, C-12, C-15 and C-16 Industrial Engines E025 High Inlet Air Temperature Derate
C-10, C-12, C-15 and C-16 Industrial Engines E016 High Engine Coolant Temperature Shutdown
C-10, C-12, C-15 and C-16 Industrial Engines E190 Engine Overspeed Warning
C-15 and C-16 Industrial Engines Camshaft
C-10, C-12, C-15 and C-16 Industrial Engines E039 Low Engine Oil Pressure Derate
325D and 329D Excavators and 325D Material Handler Machine System Specifications Handle Control (Travel)
2001/06/01 Electronic Control Modules and Computer Viruses {7620}
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for System Cabinet
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Telemetry Parameters
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.