Specifications
Show/hide table
| Engine Specifications | |
| Item | G3516B Engine |
| Cylinders and arrangement | 60 degree V-16 |
| Bore | 170 mm (6.7 inch) |
| Stroke | 190 mm (7.5 inch) |
| Total displacement | 69 L (4210 cu in) |
| Compression ratio | 11.7:1 |
| Aspiration | TA with SCAC (1) |
| Rotation (flywheel end) | Counterclockwise |
| Inlet valve lash | 0.51 mm (.020 inch) |
| Exhaust valve lash | 1.27 mm (.050 inch) |
Show/hide table
| ( 1 ) | Turbocharged Aftercooled with Separate Circuit Aftercooling |
Show/hide table
 | |
| Illustration 1 | g00759595 |
G3516B Engine design (A) Inlet valves (B) Exhaust valves (C) Flywheel | |
Show/hide table
| Crankshaft Positions For Valve Lash Setting Standard Counterclockwise Rotation |
|||
| Engine | Stroke For The Number 1 Piston At Top Center Position (1) | Inlet Valves | Exhaust Valves |
| G3516B | Compression Stroke | 1-2-5-7-8-12-13-14 | 1-2-3-4-5-6-8-9 |
| Exhaust Stroke | 3-4-6-9-10-11-15-16 | 7-10-11-12-13-14-15-16 | |
| Firing Order | 1-2-5-6-3-4-9-10-15-16-11-12-13-14-7-8 | ||
Show/hide table
| ( 1 ) | For the complete procedure, refer to the Service Manual, "Systems Operations Testing and Adjusting". |
Caterpillar Information System:
797 Off-Highway Truck Power Train Rear Axle Housing
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Generator Monitoring System PLC Diagnostics
Marine Monitoring System II Performance Tests
Marine Monitoring System II Overspeed Verification Test
Marine Monitoring System II System Tests
725 and 730 Articulated Trucks Power Train Torque Converter
C-15 and C-16 Industrial Engines Electric Starting Motor
G3516B and G3520B Generator Set Engines Camshaft - Remove
2001/01/08 A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01 A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
797 Off-Highway Truck Power Train Pressure Switch (Final Drive Oil)
797 Off-Highway Truck Power Train Bypass Switch (Differential Oil Filter)
2000/12/01 Correction to Testing and Adjusting Module, SENR5832, Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines {4490}
G3516B and G3520B Generator Set Engines Camshaft - Install
Exhaust Temperature Scanner System Description
C-15 and C-16 Industrial Engines Fuel Transfer Pump
PMG3516 Power Module Plate Locations and Film Locations
C-10, C-12, C-15 and C-16 Industrial Engines E015 High Engine Coolant Temperature Derate
C-10, C-12, C-15 and C-16 Industrial Engines E027 High Inlet Air Temperature Warning
3126B Engine for Caterpillar Built Machines CID 0041 FMI 03 8 Volt DC Supply short to +batt
3054, 3054B and 3056 Marine Engines Cooling System
C-10, C-12, C-15 and C-16 Industrial Engines E025 High Inlet Air Temperature Derate
C-10, C-12, C-15 and C-16 Industrial Engines E016 High Engine Coolant Temperature Shutdown
C-10, C-12, C-15 and C-16 Industrial Engines E190 Engine Overspeed Warning