General Information
The following diagrams are intended to aid in the disassembly and assembly of the starting motor.
Show/hide table
 | |
| Illustration 1 | g00719544 |
Starting motor (1) Solenoid assembly (2) Field winding strap (3) Solenoid plunger (6) Drive housing assembly (7) Shift lever assembly (9) Drive housing bushing (10) Pinion drive assembly (11) Seal (14) End cover assembly (15) C washer (16) Shims (18) Brush holder assembly (19) Armature assembly (20) Field winding assembly (21) Screws | |
Show/hide table
 | |
| Illustration 2 | g00731810 |
Starting motor (1) Armature assembly (2) Pinion drive assembly (3) Solenoid assembly (4) Shift lever assembly (5) Brush holder (6) Brush springs (7) Brushes (8) Excitation winding | |
Caterpillar Information System:
3406C Industrial Engine Model View Illustrations
Electronic Modular Control Panel II+ (EMCP II+) Indicator for High Water Temperature
G3516B Engines Engine Shutdown
EMCPII+ for Gas Engines Indicator for Low Coolant Level
EMCPII+ for Gas Engines GSC CID 0859 - FMI 04
EMCPII+ for Gas Engines Indicator for Engine Overspeed
G3516B Engines Turbocharger Turbine Temperature (Low)
G3516B Engines Engine Oil Filter Differential Pressure
G3516B Engines Turbocharger Turbine Temperature (High)
G3520B Engines Engine Overload
G3304 and G3306 Engines Engine Speed Sensor
G3516B Engines Fuel Energy Content
HT400 Pumper Engine Description
3500 Engines For Caterpillar Built Power Modules Engine Design
JF Series Starting Motor Armature - Test
Alternator - Delco 21SI Stator - Test
HT400 Pumper Serial Number Plate
C15 and C18 Petrolem Generator Set Engines System Overview
G3516B Engines Exhaust Port Temperature (Low)
G3516B Engines Gas Fuel Differential Pressure (Low)
G3516B Engines Fuel Metering Valve
G3516B Engines Gas Fuel Differential Pressure (High)
G3516B Engines Gas Fuel Flow Rate (Low)
3406C Industrial Engine Gauges and Indicators