Main Bearings - Inspect
Main bearings are available with a larger outside diameter than the original size bearings. These bearings are available for the cylinder blocks with the main bearing bore that is made larger than the original size of the bore. The size that is available has a 0.63 mm (.025 inch) outside diameter that is larger than the original size bearings.
Caterpillar Information System:
3306C Truck Engine Cylinder Liner Projection - Inspect
3306C Truck Engine Cylinder Block - Inspect
3306C Truck Engine Flywheel - Inspect
3306C Truck Engine Flywheel Housing - Inspect
3306C Truck Engine Vibration Damper - Check
3500B Engines for Caterpillar Built Power Modules General Information
JF Series Starting Motor Starting Motor - Disassemble
Alternator - Delco 27SI Brush Length - Check
JF Series Starting Motor Starting Motor Does Not Turn or Turns Slowly
G3516B Engines Oxygen Sensor Signal
3306C Truck Engine Engine Oil Pressure - Test
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0445 - FMI 12 (for PEEC Engines)
Alternator - Delco 21SI Field Winding - Test
EMCP3 General Information
Electronic Modular Control Panel II (EMCP II) Service Tools
Electronic Modular Control Panel II+ (EMCP II+) Fault Identification
Electronic Modular Control Panel II+ (EMCP II+) Troubleshooting Diagnostic Codes
3306C Truck Engine Battery - Test
3306C Truck Engine Charging System - Test
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0446 - FMI 12
2000/07/01 The Use Of The 179-1502 Oil Filter Element Will Extend Oil Change Intervals For G3600 Engines {1308}
3306C Truck Engine Electric Starting System - Test
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application PTO Parameters - Program
3306C Truck Engine Cooling System - Check