Hydraulic Hammer
Show/hide table
| Specifications for Hydraulic Hammers | ||
|---|---|---|
| Sales Model | H35D S (Pin-On) | |
| Working Weight | |
|
| Impact Frequency | Minimum | 800 BPM |
| Maximum | 2900 BPM | |
| Operating Pressure | Maximum | |
| Relief Valve Setting | |
|
| Maximum Back Pressure | |
|
| Pressure in the Low Pressure Circuit | Minimum | |
| Maximum | |
|
| Recommended Input Oil Flow | Minimum | |
| Maximum | |
|
Note: The operating pressure of the hammer will vary with the amount of back pressure, input flow, and the hardness of the material. The operating pressure of the hammer will be lower during operation against a harder material such as a steel plate. The operating pressure of the hammer will be higher during operation against a softer material such as rock or concrete.
Show/hide table
| |
| Illustration 1 | g01284763 |
(1) Tighten the four bolts in a cross pattern. ...
Apply 4C-5598 High Temperature Anti-Seize to the threads of the bolts.
(O) Lubricate the surfaces with clean hydraulic oil prior to assembly.
(X) An "X" is stamped on one end of these parts. These components must be assembled with the "X" end of the component in the same direction.
Caterpillar Information System:
330D Forest Machine Hydraulic System Main Hydraulic System
330D Forest Machine Hydraulic System Main Hydraulic System
330D Forest Machine Hydraulic System Operational Checks
390D Excavator Machine Systems Final Drive - Disassemble
390D Excavator Machine Systems Final Drive - Install
390D Excavator Machine Systems Final Drive - Remove
324D and 325D Forest Machines Machine Systems Main Control Valve - Install
3176C Engines for Caterpillar Built Machines Sensors and Electrical Connectors
Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180} Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180}
324D and 325D Forest Machines Machine Systems Drift Reduction Valve (Boom) - Install
324D and 325D Forest Machines Machine Systems Drift Reduction Valve (Stick) - Install
324D and 325D Forest Machines Machine Systems Main Control Valve - Remove
308C CR, 314C CR and 321C CR Excavators Air Conditioning and Heating Air Conditioning System Troubleshooting - Guide for Sensors
330D Forest Machine Hydraulic System Engine Performance - Test - Engine Speed
324D and 325D Forest Machines Machine Systems Swing Cushion Valve - Remove
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Tools (Hammer)
330D Forest Machine Hydraulic System Travel on Level Ground - Test - Optional Test
324D and 325D Forest Machines Machine Systems Swing Cushion Valve - Install
330D Forest Machine Hydraulic System Travel on Level Ground - Test
2006/11/20 The Seal for the Hydraulic Filter Is Improved and a Modified Plate Improves the Breathing of the Hydraulic Tank {5056, 5068}
324D and 325D Forest Machines Machine Systems Swing Cushion Valve - Disassemble
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Hammer Hydraulic System
324D and 325D Forest Machines Machine Systems Swing Cushion Valve - Assemble
2006/08/14 Improved Window Latches are Now Used {7310}