Improved Travel Speed Switch for Mini Hydraulic Excavators {1408, 5258}
- Mini Hydraulic Excavator:
- 303 (S/N: DMA1-UP)
- 304 (S/N: NAD1-UP)
- 305 (S/N: DSA1-UP; DGT1-UP)
Description of Change: The entrance of dirt causes the floor mounted travel switch to fail on certain mini hydraulic excavators. A new switch arrangement has additional seals in order to prevent dirt from entering.
Adaptable To: Replace the existing switch with the new arrangement. The new parts are available for the excavators that are listed above.
Note: This new switch arrangement was not installed during production of the above listed machines.Required Parts
Show/hide table
Item     | Qty     | Part Number     | Description     |
---|---|---|---|
1     | 1     | 244-5728     | Switch (1)     |
2     | 1     | 291-2308     | Shaft     |
3     | 1     | 291-2309     | Plate (2)     |
4     | 1     | 291-2310     | Washer (3)     |
5     | 1     | 291-2311     | Washer (3)     |
Show/hide table
( 1 ) | Installation torque is 27 N·m (20 lb ft). |
( 2 ) | Apply 9S-3263 Thread Lock Compound during installation. Installation torque is 15 N·m (11 lb ft). |
( 3 ) | Clean the adhesion surface. |
Show/hide table
Illustration 1 | g01278094 |
Location of the foot switch |
Show/hide table
Illustration 2 | g01278098 |
(1) Switch (2) Shaft (3) Plate (4) Washer (5) Washer (A) Mounting boss for the switch |
Assembly Instruction
- Insert shaft (2) into the boss for the switch.
- Attach the washer (4) to the top of the mounting boss.
- Hold the shaft. At the same time install plate (3) onto the shaft.
- Attach washer (5) to the switch (1). Install the switch (1) .
Caterpillar Information System:
390D Excavator Machine Systems Track Carrier Roller - Remove
308C CR, 314C CR and 321C CR Excavators Air Conditioning and Heating Air Conditioner Lines
390D Excavator Machine Systems Seat - Remove and Install
325D Forest Machine Hydraulic System Cylinder Speed - Check
324D and 325D Forest Machines Machine Systems Oil Filter (Hydraulic, Return) - Install
324D and 325D Forest Machines Machine Systems Oil Filter (Hydraulic, Return) - Remove
345C Excavator Tool Control System System 1: One-Way/One Pump/Pedal
325D Forest Machine Hydraulic System Cylinder Drift - Check
2006/06/26 The Lever Assembly for the Alarm Switch Is Improved {5051, 7429}
324D and 325D Forest Machines Machine Systems Fuel Tank - Install
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095} Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
324D and 325D Forest Machines Machine Systems Hydraulic Tank and Filter - Remove
390D Excavator Machine Systems Track Carrier Roller - Install
390D Excavator Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
325D Forest Machine Hydraulic System Medium Pressure Hydraulic System - Butt-N-Top
325D Material Handler Radiator Core - Clean
390D Excavator Machine Systems Track Roller - Remove
324D and 325D Forest Machines Machine Systems Hydraulic Tank and Filter - Install
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2104 - FMI 03
308C CR, 314C CR and 321C CR Excavators Air Conditioning and Heating Air Conditioner Lines
390D Excavator Machine Systems Track Roller - Install
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2104 - FMI 05
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2104 - FMI 06
3176C Engines for Caterpillar Built Machines Ether Injection System - Test