Fuel Filter Base
Usage:
(1) Stud (two). Used when filter base is installed high on aftercooler housing. Install stud so end of stud extends above surface of aftercooler housing boss to a dimension of ... 24.3 ± 1.5 mm (.96 ± .06 in)
(2) Put 9S3265 Retaining Compound on the tapered end of stud to a distance of ... 7.6 mm (.30 in)
(3) Sealing surface of stud.
NOTE: Do not damage this surface.
(4) Distance from sealing surface of base to end of stud ... 24.6 ± 1.3 mm (.97 ± .05 in)
(5) Torque for stud ... 70 ± 15 N·m (50 ± 11 lb ft)
Caterpillar Information System:
3406C GENERATOR SET ENGINE Primary Fuel Filter
3406C GENERATOR SET ENGINE Governor And Fuel Pump Drive Group Automatic Timing Advance Unit
3406C GENERATOR SET ENGINE Governor
3406C GENERATOR SET ENGINE Fuel Injection Pump Housing
3406C GENERATOR SET ENGINE Fuel Injection Pump
3406C GENERATOR SET ENGINE Fuel Transfer Pump
3406C GENERATOR SET ENGINE Fuel Injection Nozzle And Adapter
3406C GENERATOR SET ENGINE Fuel Injection Lines
3406C GENERATOR SET ENGINE Engine Design
3406C GENERATOR SET ENGINE Introduction
3306B GENERATOR SET ENGINE Engine & Generator
3306B GENERATOR SET ENGINE Piston Cooling Orifices
3406C GENERATOR SET ENGINE Idler Gear Shaft Pilot Bore
3406C GENERATOR SET ENGINE Idler Gear Assembly (For Front Gear Group)
3406C GENERATOR SET ENGINE Front Housing And Covers
3406C GENERATOR SET ENGINE Front (Timing) Gear Group
3406C GENERATOR SET ENGINE Accessory Drive Groups
3406C GENERATOR SET ENGINE Camshaft
3406C GENERATOR SET ENGINE Camshaft Bearings
3406C GENERATOR SET ENGINE Breather Cap
3406C GENERATOR SET ENGINE Valve Covers
3406C GENERATOR SET ENGINE Valves
3406C GENERATOR SET ENGINE Valve Rocker Arms, Lifters And Bridges
3406C GENERATOR SET ENGINE Cylinder Head