Drift Reduction Valve (Stick) - Disassemble
拆解步骤
开始:
- 拆下沉降阻尼阀。 请参阅拆解和组装, "沉降阻尼阀(斗杆)- 拆卸"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
注: 沉降阻尼阀(动臂)和沉降阻尼阀(回转)完全相同。 两个阀均可在不拆卸主控制阀的情况下从机器上拆下。
- 从阀体 (1) 上拆下 O 形密封圈 (2) 和 (3) 。
Show/hide table
图 1 | g00860280 |
- 从阀体 (1) 上卸下螺母 (4) 和线圈 (5) 。
Show/hide table
图 2 | g00860291 |
- 拆下阀芯组件 (6) 。
Show/hide table
图 3 | g00600658 |
- 拆下支承环 (7) 和 O 形密封圈 (8) 。
Show/hide table
图 4 | g00860317 |
- 拆下螺塞 (9) 和 O 形密封圈。 拆下螺栓 (10) 。 卸下歧管 (11) 和 O 形密封圈。
Show/hide table
图 5 | g00860323 |
- 拆卸安全阀 (12) 和 O 形密封圈。 拆卸安全阀 (13) 和 O 形密封圈。
Show/hide table
图 6 | g00860362 |
- 拆解阀 (12) 。 从螺塞 (15) 上拆卸钢球 (19) 、螺母 (14) 和柱塞 (17) 。 拆下 O 形密封圈 (16) 和 (18) 。
Show/hide table
图 7 | g00860419 |
- 拆解阀 (13) 。 拆下 O 形密封圈 (21) 、 (22) 、 (23) 、 (25) 和 (26) 。 拆下支承环 (20) 和 (24) 。
Show/hide table
图 8 | g00860459 |
- 拆下螺塞 (29) 和 O 形密封圈。 拆下螺栓 (27) 和盖 (28) 。
Show/hide table
图 9 | g00860532 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下 O 形密封圈 (30) 和支承环 (31) 。
Show/hide table
图 10 | g00860539 |
- 从阀体 (1) 上拆下阀 (32) 和弹簧 (33) 。
Show/hide table
图 11 | g00860544 |
Caterpillar Information System:
365C Excavator Machine Systems Drift Reduction Valve (Stick) - Install
365C Excavator Machine Systems Drift Reduction Valve (Stick) - Remove
325D and 329D Excavators Hydraulic System Relief Valve (Crossover) - Test and Adjust
302.5C Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
325D and 329D Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
2005/12/05 Improved Valve Springs are Now Used {1100, 1108}
390D Excavator Machine Systems Cab - Install
390D Excavator Machine Systems Cab - Remove
365C Excavator Machine Systems Swing Control Valve - Install
365C Excavator Machine Systems Swing Control Valve - Remove
304C and 305C Mini Hydraulic Excavators Machine Systems Load Control Valve (Boom Cylinder) - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install
365C Excavator Machine Systems Drift Reduction Valve (Stick) - Assemble
365C Excavator Machine Systems Drift Reduction Valve (Boom) - Remove
365C Excavator Machine Systems Drift Reduction Valve (Boom) - Install
365C Excavator Machine Systems Drift Reduction Valve (Boom) - Disassemble
365C Excavator Machine Systems Drift Reduction Valve (Boom) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Turbocharger - Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil Level - Check
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Radiator Core - Clean
Modification of Hydraulic Excavator Buckets from F Family Linkage to TB Family Linkage{6503, 6513} Modification of Hydraulic Excavator Buckets from F Family Linkage to TB Family Linkage{6503, 6513}
325C Excavator Engine Supplement Belt Tightener - Remove and Install