365C Excavator Machine Systems Caterpillar


Drift Reduction Valve (Stick) - Install

Usage:

365C ELC

组装步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     138-7575     连杆支架     1    

注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零件上,从而在将来引发故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新零件进行更换。




    图 1g01189229

  1. 使用工具 (A) 和适当的起吊设备将沉降阻尼阀 (7) 放置到位。 沉降阻尼阀 (7) 的重量约为 39 kg (85 lb)。

  1. 安装螺栓 (6) 。



    图 2g01189227

  1. 安装管路组件 (3) 。

  1. 连接线束组件 (5) 和软管组件 (4) 。



    图 3g01189225

  1. 连接软管组件 (1) 。

  1. 安装卡箍 (2) 。

  1. 向液压系统注油。

Caterpillar Information System:

365C Excavator Machine Systems Drift Reduction Valve (Stick) - Remove
325D and 329D Excavators Hydraulic System Relief Valve (Crossover) - Test and Adjust
302.5C Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
325D and 329D Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
2005/12/05 Improved Valve Springs are Now Used {1100, 1108}
390D Excavator Machine Systems Cab - Install
390D Excavator Machine Systems Cab - Remove
365C Excavator Machine Systems Swing Control Valve - Install
365C Excavator Machine Systems Swing Control Valve - Remove
304C and 305C Mini Hydraulic Excavators Machine Systems Load Control Valve (Boom Cylinder) - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Turbocharger - Remove
365C Excavator Machine Systems Drift Reduction Valve (Stick) - Disassemble
365C Excavator Machine Systems Drift Reduction Valve (Stick) - Assemble
365C Excavator Machine Systems Drift Reduction Valve (Boom) - Remove
365C Excavator Machine Systems Drift Reduction Valve (Boom) - Install
365C Excavator Machine Systems Drift Reduction Valve (Boom) - Disassemble
365C Excavator Machine Systems Drift Reduction Valve (Boom) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Turbocharger - Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil Level - Check
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Radiator Core - Clean
Modification of Hydraulic Excavator Buckets from F Family Linkage to TB Family Linkage{6503, 6513} Modification of Hydraulic Excavator Buckets from F Family Linkage to TB Family Linkage{6503, 6513}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.