Cooling Lines
Show/hide table
 | |
| Illustration 1 | g01144987 |
(1) Torque for nine clamps ... 11 ± 1 N·m (8 ± 0.7 lb ft)
Note: The stacks of belleville washers should be nearly collapsed flat.
Caterpillar Information System:
345C Excavator Tool Control System System 14: Relief Valve (Main) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
345C Excavator Tool Control System System 14: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
345C Excavator Tool Control System System 14: Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Control Valve
302.5C Mini Hydraulic Excavator Machine System Specifications Stick Cylinder
330C Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
330C Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
330C Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
330C Excavator Hydraulic System Accumulator (Pilot) - Test and Charge
330C Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
330C Excavator Hydraulic System Swing Speed and Swing Drift on a Slope - Check
330C Excavator Hydraulic System Swing Speed and Overswing on Level Ground - Check
330C Excavator Hydraulic System Machine Drift on a Slope - Check
365C Front Shovel Hydraulic System Relief Valve (Line) - Test and Adjust
365C Front Shovel Hydraulic System Specifications
325D and 329D Excavators Fuses - Replace
330C Excavator Hydraulic System Swing Bearing Movement - Measure
330C Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
330C Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
302.5C Mini Hydraulic Excavator Machine System Specifications Bucket Cylinder
330C Excavator Hydraulic System Fan Motor (Hydraulic Oil Cooler) - Test - Measurement of Case Drain Oil
330C Excavator Hydraulic System Fan Motor (Hydraulic Oil Cooler) - Test - Measurement of Case Drain Oil
330C Excavator Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
C11 and C15 Engines for Caterpillar Built Machines CID 0269 FMI 04 Sensor Supply too low
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers CID 0269 FMI 03 Sensor Supply too high