Governor Drive - Install - Earlier
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| B | 8T-5096 | 千分表总成 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
 | |
| 图 1 | g00626737 |
- 将适当的起吊设备连接到接头 (4) 上。 适配器 (4) 的重量约为 27 kg (60 lb)。 将适配器 (4) 放置在凸轮轴主动齿轮的合适位置上，然后安装将适配器 (4) 固定到位的螺栓。
- 将齿轮 (3) 安装在适配器 (4) 上。
- 将 O 形密封圈安装在壳体 (1) 上。 在 O 形密封圈上涂抹清洁的发动机机油。
Show/hide table
 | |
| 图 2 | g00626736 |
- 将适当的起吊设备连接在壳体 (1) 上。 壳体 (1) 的重量约为 28 kg (62 lb)。 将壳体 (1) 放置在后壳体的合适位置上，然后安装将壳体 (1) 固定到位的螺栓。
- 将原始厚度的垫片和壳体 (2) 放置在壳体 (1) 的合适位置上，然后安装将壳体 (2) 固定到位的螺栓。
Show/hide table
 | |
| 图 3 | g00626732 |
- 使用工具 (B) 并测量齿轮和小齿轮 (5) 之间的齿隙。 增加或减少垫片，以使齿隙达到 0.284 ± 0.030 mm (0.0112 ± 0.0012 inch)。
Show/hide table
 | |
| 图 4 | g01291569 |
End By: 安装调速器或调速器执行器。 请参阅 拆解和装配, "调速器 - 安装"或 拆解和装配, "调速器执行器 - 拆卸和安装"。
Caterpillar Information System:
3524B Engines for 797 and 797B Off-Highway Trucks Engine Speed Measurement
3524B Engines for 797 and 797B Off-Highway Trucks Checking and Calibrating Electronic Injection Timing with the Electronic Service Tool
Electronic Modular Control Panel II+ (EMCP II+) Component Location - For Non-Paralleling 3412C PEEC Engines
2000/01/01 Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
3508B Engine for Caterpillar Built Machines Camshaft Timing
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Speed Control
3524B Engines for 797 and 797B Off-Highway Trucks Engine Rotation
2000/02/01 Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
3508B, 3512B, and 3516B High Displacement Generator Sets Reference Material
3500B and 3500B High Displacement Generator Set Engines Fuel Injector Trim Code
3512B and 3516B High Displacement Locomotive Engines Engine Oil and Filter - Change
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0273 FMI 00 Turbo Outlet Pressure above normal
3612 and 3616 Engines Prelubrication Oil Pump - Remove
3524B Engines for 797 and 797B Off-Highway Trucks Restriction of Air Inlet and Exhaust
2000/02/01 Be Sure That The Steel Braided Engine Wiring Harnesses Are Correctly Routed and Secured {1408}
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Starting Motor System
3612 and 3616 Engines Prelubrication Oil Pump - Install
3512B Petroleum Engine Gauges and Indicators
SPT343 Truck Mounted Pumper Programmable System Parameters
3512B Petroleum Engine Manual Stop Procedure
3512B Petroleum Engine Engine Air Cleaner Differential Pressure - Check
3512B Petroleum Engine Engine Oil Filter Differential Pressure - Check
3512B Petroleum Engine Fuel System Fuel Filter Differential Pressure - Check
3512B Petroleum Engine Monitoring System