Starting the Engine
Show/hide table
引擎的排氣含可能損害您健康的燃燒產物。 引擎必須在通風良好的區域內啟動和運行,如果在封閉的環境裏,則需將廢氣排到外面去。 |
Show/hide table
當引擎處於 AUTOMATIC (自動) 模式時,引擎可能會隨時啟動。 為了避免人身傷害,當引擎處於AUTOMATIC(自動) 模式時,引擎的周圍要清場。 |
若使用自動啟動,則引擎控制開關須位於"AUTO (自動)"的位置。 當遠端啟動/熄火初始連接點關閉時,引擎會自動啟動。
Show/hide table
注意事項 |
---|
若進行新的或重新安裝的引擎初始啟動,或啟動一維修過的引擎,要準備在引擎發生超速現象時可以立即熄火。 這能由關閉補給至引擎的空氣和/或燃料而完成。 |
如果有"請勿操作"的標牌或類似的警告掛在啟動開關或操縱桿時,就不要啟動引擎或扳動任何其他的操縱桿。
確保引擎啟動前後不會危及任何人的安全。
- 執行說明於本操作與保養手冊, "啟動引擎前"章節 (操作部分) 的所有程序。
- 請確認已分離驅動設備。
若使用發電機組引擎,請確保用於發電機的主要電路為斷開。
若使用工業引擎,請確保離合器已分離。
Show/hide table注意事項 飛輪轉動時切勿起動馬達。 切勿在負載時起動引擎。
如果引擎在起動30秒內發生故障,放開起動開關或按鈕,並且試著在重新起動引擎之前等兩分鐘,以便使起動馬達冷卻。
Show/hide table插圖 1 g00319402 位於"MAN. (手動) 的引擎控制開關。 START (啟動)"位置 附註若使用選用的預潤滑泵,則預潤滑泵會在引擎起動前運作。
- 欲啟動引擎,請將引擎控制開關轉至"MAN. (手動)。 START (啟動)"位置。
搖轉週期是起動馬達工作的時間量。 這也包括搖轉週期的啟動馬達間歇的時間量。 搖轉週期和搖轉週期數是可編程的。
如果在已編程的搖轉週期數之內,引擎沒有啟動,燃油系統就不運作。 指示燈"OVERCRANK (過度搖轉)"會亮起,以警告操作員過度搖轉。
若引擎發生過度搖轉,在試圖啟動前必須將控制儀板重新設定。 欲重新設定控制儀板,請將引擎控制開關轉至"OFF/RESET (關閉/重設)"的位置。
Caterpillar Information System:
SR500 Generators Safety Signs and Labels
SR500 Generators Reference Numbers
SR500 Generators Generator Identification
SR500 Generators Generator Isolating for Maintenance
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
SR500 Generators Electrical System
SR500 Generators Engine Starting
SR500 Generators Before Starting Engine
SR500 Generators Mounting and Dismounting
SR500 Generators Crushing Prevention and Cutting Prevention
SR500 Generators Fire Prevention and Explosion Prevention
SR500 Generators Burn Prevention
G3406 Engine After Starting Engine
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft - Remove
G3304 and G3306 Engines Ignition System
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Misfires, Runs Rough or Is Unstable
3516B Engine for Caterpillar Built Machines Inspecting Electrical Connectors
3500 Industrial and Generator Set Engines Manual Stop Procedure
3608 Engine Pressure Transducer
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Intermittent Engine Shutdown
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
2000/07/01 New Hydramechanical Shutoff Groups Reduce The Occurrence Of Improper Shutdowns {1289}
C-12 Engine Model View Illustrations
C-12 Engine Gauges and Indicators