Fan Motor (Radiator Cooling) - Test - Measurement of Case Drain Oil
Show/hide table
所需工具     | ||
---|---|---|
零件号     | 说明     | 数量     |
6V-9830     | 盖组件     | 1     |
    | 远置排放软管,内径为 27.2 mm (13/16 in)     |
1     |
    | 测量用容器     | 1     |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将机器停放在水平地面上。
- 停止发动机。
- 释放液压系统压力。 请参阅测试和调整, "液压系统压力 - 释放"。
- 将箱体排放软管 (3) 从接头 (4) 处断开。 将 6V-9830 盖组件 安装到接头 (4) 上。
Show/hide table
图 1 | g00856013 |
俯视图 (1) 散热器风扇马达 (2) 液压油冷却器风扇马达 (3) 箱体排油软管 (4) 接头 (5) 缸体 |
- 将远程排放软管的一端连接至软管 (3) 。 将远程排放软管的另一端放入容器中以便测量箱体排油量。
- 起动发动机。
- 根据测试和调整, "风扇马达转速(液压和散热器冷却)- 测试和调整"设定固定风扇转速。
- 测量一分钟内的箱体排油量。
最大箱体排油量 ... 5 L/min (1.3 US gpm)
Caterpillar Information System:
385B Excavator Hydraulic System Fan Motor (Hydraulic Oil Cooler) - Test - Measurement of Case Drain Oil
385B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
385B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
385B Excavator Hydraulic System Gear Pump (Pilot) - Test
385B Excavator Hydraulic System Piston Pump (Swing) - Test - Positive Flow Control
385B Excavator Hydraulic System Piston Pump (Swing) - Test - Constant Horsepower Flow Control
385B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
385B Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
325D and 329D Excavators Machine System Specifications Pilot Valve
385B Excavator Hydraulic System Margin Pressure - Test and Adjust
M318C Excavator Hydraulic System Control Valve (Stick Lowering) - Test and Adjust
3126B Engine for Caterpillar Built Machines Injector Solenoid Circuit - Test
M318C Excavator Hydraulic System Pressure Switch (Overload Warning) - Test and Adjust
330C Excavator Machine System Specifications Recoil Spring
2001/11/26 Correction to Systems Operation, Testing and Adjusting , " Pump Control (Negative Flow) - Test" {5070}
303 CR Mini Hydraulic Excavator Window Wiper and Washer Control - If Equipped
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Track Roller Mounting
385B Excavator Machine System Specifications Pump Lines (Main)
330C Excavator Tool Control System System 14: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
5230B Excavator Machine Electronic Control System Solenoid Valves
330C Forest Machine Hydraulic System Main Hydraulic Pump Air - Purge
330C Excavator Hydraulic System Operational Checks
330C Excavator Tool Control System System 14: Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Control Valve
330C Forest Machine Machine System Specifications Fuel Tank