Travel Alarm Sounds while Travel Controls Are Released - Troubleshoot
Check that wire terminals and components are connected properly: CONN35, CONN47 and CONN52. If the problem still exists, use the following checking procedure diagram to troubleshoot the system.
The following chart is for the 311C.
Show/hide table
Illustration 1 | g00800971 |
Show/hide table
Illustration 2 | g00799876 |
311C Circuit |
The following chart is for the 314CCR.
Show/hide table
Illustration 3 | g00864400 |
Show/hide table
Illustration 4 | g00864358 |
314CCR Circuit |
Caterpillar Information System:
311C and 314C Excavators Electric and Electronic Travel Alarm Does Not Sound - Troubleshoot
311C and 314C Excavators Electric and Electronic Timer - Troubleshoot
315C Excavator Engine - Install
311C and 314C Excavators Electric and Electronic System Schematic
311C and 314C Excavators Electric and Electronic Radio Does Not Sound - Troubleshoot
311C and 314C Excavators Electric and Electronic Radio Does Not Activate - Troubleshoot
311C and 314C Excavators Electric and Electronic Proportional Reducing Valve - Calibrate
311C and 314C Excavators Electric and Electronic Power to Switch Panel - Troubleshoot
311C and 314C Excavators Electric and Electronic Panel Light for Monitor Does Not Illuminate - Troubleshoot
311C and 314C Excavators Electric and Electronic No Power - Troubleshoot
311C and 314C Excavators Electric and Electronic Low Idle System Does Not Respond to Low Idle Switch - Troubleshoot
311C and 314C Excavators Electric and Electronic Low Idle Indicator Does Not Respond to Low Idle Switch - Troubleshoot
311C and 314C Excavators Electric and Electronic Travel Pressure Switch - Troubleshoot
311C and 314C Excavators Electric and Electronic Window Washer Does Not Activate - Troubleshoot
311C and 314C Excavators Electric and Electronic Wiper Motor Does Not Rotate - Troubleshoot
311C and 314C Excavators Electric and Electronic Wiper Motor Does Not Stop - Troubleshoot
311C and 314C Excavators Electric and Electronic Starting Motor Does Not Rotate - Troubleshoot
311C and 314C Excavators Electric and Electronic Speed Sensor - Replace
311C and 314C Excavators Electric and Electronic Speed Sensor - Troubleshoot
311C and 314C Excavators Electric and Electronic Service Hour Meter Does Not Activate - Troubleshoot
BA22, BA25 and BA30 Angling Brooms General Information
311C and 314C Excavators Electric and Electronic Monitor - Disassemble
5110B Excavator Machine Systems Swing Motor - Remove
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Battery Disconnect Switch