Crankshaft Front Seal - Install
安装步骤
Show/hide table
| 需要的工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| C | 1U-7430 | 前油封安装工具 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (C) ，拆下曲轴前油封 (1) 。
Show/hide table
 | |
| 图 1 | g01138218 |
注: 曲轴油封的设计在安装时必须干躁。
End By: 安装曲轴减振器和皮带轮。 请参阅 解体和组装, "减振器和皮带轮 - 拆卸和安装"。
Caterpillar Information System:
C9 Engine For Caterpillar Built Machines Crankshaft Front Seal - Remove
Caterpillar Monitoring System for Electronic Modular Control Panel Initial Troubleshooting Procedure
C9 Engine For Caterpillar Built Machines Front Cover - Install
C9 Engine For Caterpillar Built Machines Front Cover - Remove
120H and 135H Motor Graders Machine Systems Combination Valve - Assemble
C9 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
3406E, C-10 and C-12 Truck Engines Maintenance Log
3512B Marine Auxiliary Engines Engine Oil Screen - Remove and Install
3612 and 3616 Engines Idler Gears (Rear) - Remove
3500 Generator Sets Voltage and Frequency - Check
SR4 and SR4B Generators and Control Panels Air Inlet Filter - Check
SR4 and SR4B Generators and Control Panels Bearing Temperature - Measure/Record
3612 and 3616 Engines Idler Gears (Rear) - Install
SR4 and SR4B Generators and Control Panels Tools
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Starting with Jump Start Cables
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Intermittent Engine Shutdown
C9 Engine For Caterpillar Built Machines Engine Oil Pan - Remove and Install
3056 Engine for Caterpillar Built Machines Engine Oil Pump - Remove
C9 Engines for Caterpillar Built Machines Housing (Front) - Remove
3056 Engine for Caterpillar Built Machines Engine Oil Pump - Install
C9 Engine For Caterpillar Built Machines Housing (Front) - Install
C9 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3500B and 3500B High Displacement Generator Set Engines Intermittent Low Power or Power Cutout
3500B and 3500B High Displacement Generator Set Engines Low Power/Poor or No Response to Throttle