Governor - Remove
拆卸步骤
Show/hide table
 |
在维修过程中，确保发动机不能起动。 当发动机配备自动起动/停止系统时，这一点十分重要。 在维修配备空气起动系统的发动机前，关闭向起动马达供气的供气阀。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
 | |
| 图 1 | g01291070 |
- 标记线束组件，然后将线束组件从调速器 (1) 上断开。
- 断开调速器 (1) 轴上的连杆组件 (2) （未显示）。
- 如有配备，从调速器上断开管组件。
- 将适当的起吊设备连接在调速器 (1) 上。 调速器 (1) 的重量约为 80 kg (176 lb)。
- 卸下将调速器 (1) 固定至调速器驱动装置的螺栓。
- 将调速器直接提起，以便从联轴器上断开调速器传动轴。
- 将调速器保持垂直，以防损失机油。
Caterpillar Information System:
3500B and 3500B High Displacement Generator Set Engines Factory Passwords Worksheet
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
Caterpillar Monitoring System for Electronic Modular Control Panel Main Display Module
SR4 and SR4B Generators and Control Panels Model View Illustrations
SR4 and SR4B Generators and Control Panels Generator Description
C-15, C-16 and C-18 Truck Engines Water Pump - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft - Remove
3406E and 3456 Generator Set Engines Vibration Damper and Pulley - Remove and Install
3003, 3013, 3014 and 3024 Industrial Engines Refill Capacities
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Emergency Stopping
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
30SI Series and 34SI Series Alternator Normal Operation
3508, 3512, and 3516 Generator Sets Generator Lead Connections
3618 Engine Engine Lifting Bracket - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft - Install
3508, 3512, and 3516 Generator Sets Voltage Connections
3618 Engine Engine Support - Remove and Install
C-15, C-16 and C-18 Truck Engines Belt Tensioner - Remove and Install
3618 Engine Mounting Isolator - Remove and Install
3116 On Highway Engines Valve Mechanism Cover - Remove and Install
C-15, C-16 and C-18 Truck Engines Water Pump - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines V-Belts - Remove and Install
3612 and 3616 Engines Governor - Install
3618 Engine Air Starting Motor - Remove