Inlet and Exhaust Valve Springs - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 4C-6726 | 气门弹簧压缩器 | 1 |
开始:
- 拆下气门机构盖。 请参阅拆解和组装, "气门机构盖 - 拆卸和安装"。
- 拆下电子单体喷油器。 请参阅拆解和组装, "电子单体喷油器 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 下列步骤用于拆卸进气门弹劾和出气门弹簧,不用拆卸缸盖。 一次只能在一个气缸上执行该步骤。 这会防止进气门和排气门落入气缸。
- 旋转曲轴使活塞位于缸内上止点。
Show/hide table
图 1 g01019733 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 将工具 (A) 底部放在气缸盖上。 安装固定螺栓 (1)。
- 安装工具 (A) 的其余部分。
- 拧紧工具 (A) 上的螺母,以便压缩进气门弹簧和出气门弹簧。
- 拆下挡圈锁 (3)。
- 拆下工具 (A)。
- 拆卸气门旋转器 (4) 。
- 将内部气门弹簧 (5) 和外部气门弹簧 (6) 从每个气门 (2) 上拆下。
- 从缸盖上卸下底座。
- 转动曲轴前安装进气门弹簧和排气门弹簧。
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 4C-6726 | 气门弹簧压缩器 | 1 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 确保活塞位于上止点位置,以便安装进气门弹簧和出气门弹簧。
- 安装进气门弹簧和出气门弹簧底座。
Show/hide table
图 2 g01019733 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 将内部气门弹簧 (5) 和外部气门弹簧 (6) 安装到每个气门 (2) 上。
- 安装气门旋转器 (4) 。
- 安装工具 (A)。 安装固定螺栓 (1)。
- 拧紧工具 (A) 上的螺母,以便压缩进气门弹簧和出气门弹簧。
- 安装挡圈锁片 (3)。
- 拆下工具 (A)。
结束:
- 安装电子单体喷油器。 请参阅拆解和组装, "电子单体喷油器 - 安装"。
- 安装气门机构盖。 请参阅拆解和组装, "气门机构盖 - 拆卸和安装"。
Caterpillar Information System:
312B Excavator Machine Systems Final Drive - Assemble
M312, M315, M318 and M320 Excavators Hydraulic System Pilot Valve (Pilot Manifold)
3176C and 3196 Engines for Caterpillar Built Machines Air Conditioner Support Bracket - Remove and Install
320B Excavator Machine System Specifications Lines (Stick)
3046 Engine For Caterpillar Built Machines Water Temperature Regulator - Remove and Install
M312, M315, M318 and M320 Excavators Hydraulic System Pilot Valve (Pilot Manifold)
320B Excavator Machine System Specifications Stick Lines - Log Loader
318B Excavator Machine Systems Hydraulic Track Adjusters - Assemble
320D and 323D Excavators Machine System Specifications Bucket Cylinder Lines
M312, M315, M318 and M320 Excavators Hydraulic System Hydraulic Filter (Pilot)
M312, M315, M318 and M320 Excavators Hydraulic System Hydraulic Filter (Pilot)
317B Excavator Machine System and Attachment Specifications Boom Lighting - Left Hand
M312, M315, M318 and M320 Excavators Hydraulic System Relief Valve (Pilot)
M312, M315, M318 and M320 Excavators Hydraulic System Relief Valve (Pilot)
M312, M315, M318 and M320 Excavators Hydraulic System Solenoid Valve (Relief and Proportional Reducing)
M312, M315, M318 and M320 Excavators Hydraulic System Solenoid Valve (Relief and Proportional Reducing)
M312, M315, M318 and M320 Excavators Hydraulic System Control Valve (Medium Pressure Function)
312B Excavator Machine Systems Final Drive - Disassemble
M312, M315, M318 and M320 Excavators Hydraulic System Pilot Valve (Joystick)
3046 Engine For Caterpillar Built Machines Flywheel - Remove
320B Excavator Machine System Specifications Lines (Pilot) - Cab Riser
320B Excavator Machine System Specifications Stick Cylinder
320B Excavator Machine System Specifications Stick Cylinder
M312, M315, M318 and M320 Excavators Hydraulic System Main Hydraulic System