3500 and 3500B High Displacement Engines for Caterpillar Built Machines Caterpillar


Accessory Drive (Front) - Install

Usage:

785C 1HW

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 1g00906510

  1. 用清洁的发动机机油涂在前接头组件 (5)的O形密封圈上。 整体同时安装传动齿轮、轴和前接头组件 (5)。 确保传动齿轮轮齿与机油泵和水泵传动齿轮轮齿正确对齐。 安装螺栓 (6)以将前接头组件 (5)固定在正确位置。

  2. 用清洁的发动机机油涂在附件驱动器前盖的O形密封圈上。 用螺栓安装前盖。


    图 2g01054400

  3. 用清洁的发动机机油涂在后接头组件 (3)的O形密封圈上。 定位后接头 (3)并安装螺栓 (4)。

  4. 用清洁的发动机机油涂在附件驱动器后盖 (2)的O形密封圈上。 用螺栓 (1)安装后盖 (2)。

  5. 安装交流发电机皮带轮 (如果配备)。

Caterpillar Information System:

3500B Locomotive Engines Electrical Power Supply
3500B Locomotive Engines CAT Data Link
3114, 3116 and 3126 MUI Engine Governors Governor (Type V) - Assemble
Cat Commercial Diesel Engine Fluids Recommendations Contamination Control
SR500 Generators Symbols
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Flywheel and Flywheel Housing Runout
3500B Locomotive Engines Air Shutoff System
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Electronic Display Module - Optional
3406E Generator Set Engines Reference Numbers
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Engine Monitoring System - Programmable
3500B Locomotive Engines Customer Parameters Worksheet
3500B Locomotive Engines Factory Passwords Worksheet
G3612 and G3616 Engines Fuel Shutoff Solenoid - Remove and Install
3500B Locomotive Engines Ether Injection System
3306B Generator Set Electronic Modular Control Panel II+ (EMCP II+)
3114, 3116 and 3126 Engines Excessive White Smoke
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Front Drive Housing - Remove and Install
3034 Engine for Caterpillar Built Machines Turbocharger
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
G3612 and G3616 Engines Fuel Control Valve - Remove and Install
G3612 and G3616 Engines Spark Plugs - Remove and Install
G3612 and G3616 Engines Detonation Sensor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Flywheel - Remove and Install
3054, 3054B and 3056 Marine Engines Crankcase Breather
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.