153-4083 Auger Bit (Six Inch Diameter)
 | |
| Illustration 1 | g00410338 |
(1) Torque for the bolt ... 100 ± 20 N·m (75 ± 15 lb ft)
(2) Torque for the bolt ... 100 ± 20 N·m (75 ± 15 lb ft)
(B) Digging Angle
The flat side (C) of tooth (A) against the mounting surface ... 40°
The angled side (D) of tooth (A) against the mounting surface ... 50°
(E) Cutting Diameter
The flat side (C) of tooth (A) against the mounting surface ... 190.5 mm (7.5 inches)
The angled side (D) of tooth (A) against the mounting surface ... 177.8 mm (7.0 inches)
153-4084 Auger Bit (Nine Inch Diameter)
 | |
| Illustration 2 | g00410341 |
(1) Torque for the bolt ... 100 ± 20 N·m (75 ± 15 lb ft)
(2) Torque for the bolt ... 100 ± 20 N·m (75 ± 15 lb ft)
(B) Digging Angle
The flat side (C) of tooth (A) against the mounting surface ... 40°
The angled side (D) of tooth (A) against the mounting surface ... 50°
(E) Cutting Diameter
The flat side (C) of tooth (A) against the mounting surface ... 266.7 mm (10.5 inches)
The angled side (D) of tooth (A) against the mounting surface ... 254 mm (10.0 inches)
153-4085 Auger Bit (Twelve Inch Diameter)
 | |
| Illustration 3 | g00410342 |
(1) Torque for the bolt ... 100 ± 20 N·m (75 ± 15 lb ft)
(2) Torque for the bolt ... 100 ± 20 N·m (75 ± 15 lb ft)
(B) Digging Angle
The flat side (C) of tooth (A) against the mounting surface ... 40°
The angled side (D) of tooth (A) against the mounting surface ... 50°
(E) Cutting Diameter
The flat side (C) of tooth (A) against the mounting surface ... 342.9 mm (13.5 inches)
The angled side (D) of tooth (A) against the mounting surface ... 330.2 mm (13.0 inches)
153-4086 Auger Bit (Eighteen Inch Diameter)
 | |
| Illustration 4 | g00387375 |
(1) Torque for the bolt ... 100 ± 20 N·m (75 ± 15 lb ft)
(2) Torque for the bolt ... 100 ± 20 N·m (75 ± 15 lb ft)
(B) Digging Angle
The flat side (C) of tooth (A) against the mounting surface ... 40°
The angled side (D) of tooth (A) against the mounting surface ... 50°
(E) Cutting Diameter
The flat side (C) of tooth (A) against the mounting surface ... 495.3 mm (19.5 inches)
The angled side (D) of tooth (A) against the mounting surface ... 482.6 mm (19.0 inches)