 | |
| Illustration 1 | g00299398 |
(1) Lubricate the threads and tighten the nut to the following torque. ... 8000 ± 800 N·m (5900 ± 590 lb ft)
(2) Bore of new cylinder ... 190.55 ± 0.10 mm (7.502 ± 0.004 inch)
(3) Diameter of new rod ... 152.68 ± 0.03 mm (6.011 ± 0.001 inch)
(4) Bore of new head ... 152.351 ± 0.038 mm (5.9981 ± 0.0015 inch)
(5) Lubricate the lips of the seals with a small amount of the oil that is being sealed.
(6) Tighten the 10 bolts to the following torque. ... 900 ± 100 N·m (660 ± 75 lb ft)
(7) 6E-5814 Bearing
- Outside diameter ... 132.591 ± 0.013 mm (5.2201 ± 0.0005 inch)
- Inside diameter ... 120.363 ± 0.013 mm (4.7387 ± 0.0005 inch)
Bore for 6E-5814 Bearing ... 132.34 ± 0.05 mm (5.210 ± 0.002 inch)
Stick Cylinder Drift
Start with the stick cylinders at full extension. The allowable drift with the oil temperature at 38°C (100°F) is 40 mm (1.58 inch) in 5 minutes.
Note: The minimum allowable time for the cylinder drift at other oil temperatures is specified in illustration 2.
 | |
| Illustration 2 | g00296667 |