Air Cleaner - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439-3938 | Link Bracket | 1 |
- Install Tool (A) and attach a suitable lifting device to air cleaner (2).
- Loosen clamp (1) from the boot.
- Remove five bolts (3) and remove air cleaner (2). The air cleaner weighs approximately
32 kg (70 lb) .
Show/hide table
Illustration 1 | g00597144 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439-3938 | Link Bracket | 1 |
- Install Tool (A) and use a suitable lifting device to hold air cleaner (2) in position.
- Install five bolts (3).
- Tighten clamp (1) on the boot.
Show/hide table
Illustration 2 | g00597144 |
Caterpillar Information System:
G3500 Engines Drive Housing (Front) - Remove and Install
G3500 Engines Air Inlet Manifold - Remove and Install
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
SR500 Generators General Hazard Information
3114, 3116 and 3126 Engines Engine Misfires, Runs Rough or Is Unstable
3114, 3116 and 3126 Engines Engine Has Early Wear
G3408 and G3412 Engines Valve Mechanism
3500B Engines Fuel Transfer Pump - Assemble
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0338 - FMI 05 Pre-Lube Relay open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0273 - FMI 13 Turbo Outlet Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0273 - FMI 04 Turbo Outlet Pressure short to ground
SR500 Generators Engine Stopping
3116 and 3126 Marine Engines Gauges and Indicators
Electronic Modular Control Panel II (EMCP II) For MUI Engines Pulse Width Modulated (PWM) Sensor - Test
3116 Truck Engine Aftercooler Core - Clean/Test - Air-To-Air Aftercooler
Installation of Cylinder Head Gasket{1124} Installation of Cylinder Head Gasket{1124}
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Symbols
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0094 - FMI 02 Fuel Pressure misinstalled