Air Inlet Manifold - Remove and Install
Start By:
- Remove the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1) from the cylinder head and remove bolts (2) from air inlet manifold (7).
- Remove air inlet elbows (3) from the engine.
- Remove bolts (4) from cover (5) on air inlet manifold (7).
- If necessary, remove air inlet adapter (6) and cover (5).
Show/hide table
Illustration 1 | g01250966 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- If necessary, install cover (5) and air inlet adapter (6) on air inlet manifold (7).
- Install bolts (4).
- Position air inlet elbows (3) on the engine.
- Install bolts (2) in air inlet manifold (7) and install bolts (1) in the cylinder head.
Show/hide table
Illustration 2 | g01250966 |
End By:
- Install the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove and Install".
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
SR500 Generators General Hazard Information
3114, 3116 and 3126 Engines Engine Misfires, Runs Rough or Is Unstable
3114, 3116 and 3126 Engines Engine Has Early Wear
G3408 and G3412 Engines Valve Mechanism
3500B Engines Fuel Transfer Pump - Assemble
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0338 - FMI 05 Pre-Lube Relay open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0273 - FMI 13 Turbo Outlet Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0273 - FMI 04 Turbo Outlet Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0273 - FMI 03 Turbo Outlet Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
G3500 Engines Drive Housing (Front) - Remove and Install
G3500 Engines Air Cleaner - Remove and Install
SR500 Generators Engine Stopping
3116 and 3126 Marine Engines Gauges and Indicators
Electronic Modular Control Panel II (EMCP II) For MUI Engines Pulse Width Modulated (PWM) Sensor - Test
3116 Truck Engine Aftercooler Core - Clean/Test - Air-To-Air Aftercooler
Installation of Cylinder Head Gasket{1124} Installation of Cylinder Head Gasket{1124}
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Symbols
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt