Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
Usage:
All Caterpillar Built Machines Equipped with 3054 and 3056 Commerical Engines
Description of Change: All Stanadyne fuel injection pumps that are used on 3054 and 3056 commercial engines are now equipped with tamper resistant fittings. A new tool has been released for use with the tamper resistant fittings.
Adaptable To: 154-7151 Bolt Remover Kit is now available for use with the tamper resistant fittings. Contact your Caterpillar dealer for more information.
Caterpillar Information System:
1998/11/09 Improved VIMS 100-3055 And 118-7226 Temperature Sensor Groups Now Used {7601,1408}
1998/11/09 Differences In Swivels Are Identified To Determine Correct Seal Kit Use {5060}
1998/11/09 Water Pump Gasket For Emissions Engines Not Clearly Identified In Parts Manual {1361}
1998/11/02 Improved Test Of Charging System{1406}
1998/11/02 New Hydraulic Hose In Travel Lines Eliminates Interference With Swivel Switch{5057}
1998/11/02 New Travel Relay Replaces Timer Relay In Electrical Junction Box{7426}
1998/11/02 Cycle Time To Lower Variable Adjusting (VA) Boom Cylinders Is Increased{5456}
1998/11/02 Harness Improved For Temperature Regulating Switch In Air Conditioner{1408,7320}
1998/10/26 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available{4450}
1998/10/26 O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced{1251}
1998/10/26 Installation Of Tow Hooks To Carbody{7103,7062}
1998/10/26 New Gasket Prevents Coolant Leaks In Radiator Assemblies{1353}
1998/11/16 Special Instruction, REHS0347, "Instructions For Changing The Operating Language Of The DASA Computer" Available{0374,7600}
1998/11/16 A Special Instruction Is now Available For Reinforcing Stick Assemblies{6500,6502}
1998/11/16 Special Instructions Are Now Available For Installing Two-Way And Four-Way Pilot Valves{5050,5059,5491}
1998/11/16 Vacuum Breaker Moved From Horizontal To Angular Position On Hydraulic Tank{5056,5076}
1998/11/16 New Cab Platform Mounts Improve Cab Support And Flexibility{7253}
1998/11/16 Compensator And Socket Head Bolts For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Now Available{1714}
1998/11/16 Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/23 Identification Of Fuel Injection Tube Assemblies {1252}
1998/11/23 The Correct Procedure For Starting The Engine Provides Accurate Prestart Fluid Level Monitoring On Electronic Monitor {7490,1416}
1998/11/23 New Indicator Assembly In The Air Cleaner Group {1051,7452}
1998/11/23 New Seal Kits Prevent Hydraulic Cylinder Oil Leaks {5456,5457,5458}
1998/11/23 New Check Valve Used For Refueling Pump {1295}