Usage:
(1) End play for the shaft ... .0045 ± .0015 in.(0.114 ± 0.038 mm)
Maximum permissible end play ... .008 in.(0.203 mm)
(2) Thickness of thrust bearing ... .211 ± .001 in.(5.36 ± 0.02 mm)
(3) Diameter of shaft bearing surface ... .5612 to .5615 in.(14.25 to 14.26 mm)
Bore in bearing ... .5627 to .5630 in.(14.29 to 14.30 mm)
Maximum permissible clearance ... .003 in.(0.08 mm)
(4) Torque for nut for band clamp ... 120 lb. in.(138.4 cm.kg)
(5) Maximum permissible clearance between ends of oil seal ring measured in housing bore ... .009 in.(0.23 mm)
(6) Torque for shaft nut ... 15 ± 1 lb. ft.(2.0 ± 0.14 mkg)
(7) Bore in housing ... .8762 to .8767 in.(22.25 to 22.26 mm)
Outside diameter of bearing ... .8718 to .8722 in.(22.14 to 22.15 mm)
Maximum permissible clearance between bearing and housing ... .006 in.(0.15 mm)
(8) Thickness of thrust ring ... .1005 ± .0005 in.(2.56 ± 0.01 mm)
(9) Torque for nuts holding turbocharger to manifold ... 40 ± 4 lb. ft.(5.5 ± 0.55 mkg)