Crankshaft Pulley - Remove and Install
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Loosen the bolts for the alternator and slide the alternator toward the engine in order to remove the V-belt from the engine.
- Remove bolt (1) and washer (2) from the crankshaft.
Show/hide table
Illustration 1 | g00577717 |
- Remove crankshaft pulley (3) from the engine.
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean the following components: keyway, key, bore of the crankshaft pulley, end of the crankshaft and washer.
- Put crankshaft pulley (3) in position on the engine.
Show/hide table
Illustration 2 | g00577717 |
- Inject a 3 mm (0.12 inch) bead of 8T-9022 Silicone Gasket into the crevice between the crankshaft and the crankshaft pulley. Please refer to illustration 3.
- Lubricate bolt (1) with clean engine oil.
Show/hide table
Illustration 3 | g00712512 |
- Install washer (2) and bolt (1) in the crankshaft. Tighten bolt (1) to a torque of 185 N·m (136 lb ft).
- Put the V-belt in position on the engine.
- Slide the alternator away from the engine in order to tension the alternator V-belt. Tighten the bolts for the alternator. For more information on the tension for the alternator V-belt, refer to the Testing and Adjusting Module, "Belt Tension Chart".
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
3612 and 3616 Engines Exhaust Manifold
3034 Engine for Caterpillar Built Machines Alternator - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
3612 and 3616 Engines Exhaust Manifold
3126 Truck Engine (Military) Exhaust Brake
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Injection Control Linkage
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve - Install
G3500 Engines Crankshaft - Install
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve - Remove
3054, 3054B and 3056 Marine Engines Marine Transmission Oil
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Governor
G3500 Engines Crankshaft Main Bearings - Remove
3600 Distillate Fuel Engines Product Description
3500B High Displacement Generator Set Engines Model View Illustrations
3406E On-Highway Engine Pistons and Connecting Rods - Remove
G3500 Engines Crankshaft Main Bearings - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
3408E and 3412E Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Remove
3408E and 3412E Engines for Caterpillar Built Machines Air in Fuel - Test
3406E On-Highway Engine Connecting Rod Bearings - Remove
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Filter Base
3406E On-Highway Engine Connecting Rod Bearings - Install