Engine Oil Pan
Show/hide table
Illustration 1 | g00506490 |
Left side view |
Show/hide table
Illustration 2 | g00506546 |
Right side view |
(1) Tighten the bolts to the following torque. ... 55 ± 10 N·m (41 ± 7 lb ft)
(2) Lubricate the plug with oil. Tighten the plug to the following torque. ... 82 ± 10 N·m (60 ± 7 lb ft)
(3) Lubricate the plug with oil. Tighten the plug to the following torque. ... 70 ± 15 N·m (52 ± 11 lb ft)
(4) Lubricate the bore for the seal lightly with engine oil or with glycerin.
Caterpillar Information System:
3306B Industrial Engine Engine Oil Pressure Switch
3306B Industrial Engine Engine Oil Pressure Switch
3306B Industrial Engine Coolant Temperature Switch
3408E and 3412E Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C-10 and C-12 Industrial Engines Fuel Pressure Sensor
3306B Industrial Engine Engine Oil Pressure Switch
3408E and 3412E Industrial Engines Fuel Temperature Sensor
3408E and 3412E Industrial Engines Coolant Temperature Sensor
3306B Industrial Engine Coolant Temperature Sender
3408E and 3412E Engines for Caterpillar Built Machines Speed/Timing Sensor
3408E and 3412E Engines for Caterpillar Built Machines Water Pump
3306B Industrial Engine Fuel System
3406E On-Highway Engine Pistons and Connecting Rods - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Housing (Front)
3114, 3116 and 3126 MUI Engine Governors Governor Speed Circuit
3412C Engine Pistons and Connecting Rods - Install
3408E and 3412E Industrial Engines Gear Group (Front)
3306B Industrial Engine Engine Oil Pressure Switch
G3606 and G3608 Engines Reference Material
TK711, TK721, TK722 and TK732 Track Feller Bunchers Battery - Recycle
3306B Industrial Engine Ammeter
Charging System Troubleshooting {1406} Charging System Troubleshooting {1406}
3412E and C30 Engines Engine Support (Front)
Gas Engine Driven Chiller Driveline Troubleshooting