Engine Oil Pump - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install engine oil pump (4) onto the cylinder block. Ensure that the idler gear is engaged with the crankshaft gear and install the washers and four bolts (2) .
Show/hide table
Illustration 1 | g00501740 |
Show/hide table
The engine oil pump idler gear can fall off of the pump when the pump is removed or installed. Injury may result. To help prevent injury, always hold the idler gear on the pump when the pump is removed or installed. |
- Install two bolts (3) that hold the scavenge line to engine oil pump (4) .
- Install the lock washer and bolt (1) that holds the suction bell to the oil pan plate.
End By: Install the engine oil pan. Refer to Disassembly and assembly, "Engine Oil Pan - Remove and Install".
Caterpillar Information System:
3406E On-Highway Engine Valve Mechanism Cover Base - Remove and Install
3306B Industrial Engine Engine Support (Front)
3306B Industrial Engine Engine Oil Level - Check
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Remove
3306B Industrial Engine Engine Support (Front)
3406C (PEEC III) Truck Engine Compression Brake
3304B and 3306B Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
3306B Industrial Engine Camshaft Bearings - Remove and Install
3306B Industrial Engine Engine Oil Pan
3406E On-Highway Engine Valve Mechanism Cover - Remove and Install
3306B Industrial Engine Overhaul Considerations
3306C Engines for Caterpillar Built Machines Fuel Filter Base
3306B Industrial Engine Engine Oil Pump - Disassemble
Electronic Modular Control Panel II+ (EMCP II+) Paralleling Mode
3406C (PEEC III) Truck Engine Belt Tightener
3176C Engine Engine Design
3408E and 3412E Engines for Caterpillar Built Machines Alternator and Regulator
3306B Industrial Engine Fuel System Secondary Filter - Replace
3406C (PEEC III) Truck Engine Accessory Drive
3306B Industrial Engine Engine Oil Pump - Assemble
3306B Industrial Engine Alternator and Regulator
3408E and 3412E Engines for Caterpillar Built Machines Alternator and Regulator
3306B Industrial Engine Alternator and Regulator
3306B Industrial Engine Alternator and Regulator