Flywheel Housing
Show/hide table
 | |
| Illustration 1 | g00500458 |
Tightening sequence | |
Use the following procedure in order to tighten the flywheel housing bolts:
- Tighten the bolts in the numerical sequence, as shown.
Tighten the bolts to the following torque. ... 105 ± 20 N·m (77 ± 15 lb ft)
Note: Refer to the Testing And Adjusting, "Basic Block" for additional information on the flywheel and the flywheel housing.
Caterpillar Information System:
Gas Engine Driven Chiller Driveline Gearbox Oil and Oil Filter - Change
Gas Engine Driven Chiller Driveline Gearbox Oil Analysis - Obtain
Gas Engine Driven Chiller Driveline Gearbox Hub Bolts and Flange Bolts - Check
3306C Engines for Caterpillar Built Machines Flywheel Housing
Gas Engine Driven Chiller Driveline Gearbox Gear Teeth - Inspect
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
3306B Industrial Engine Flywheel
Installation Of The Auxiliary Engine Oil Reservoir Group{1302} Installation Of The Auxiliary Engine Oil Reservoir Group{1302}
3512B Marine Auxiliary Engine Flexible Coupling - Inspect
Gas Engine Driven Chiller Driveline Torsional Coupling Spring Packs - Replace
Gas Engine Driven Chiller Driveline Torsional Coupling - Inspect
Gas Engine Driven Chiller Driveline Torsional Coupling - Disassemble/Clean/Inspect
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
Gas Engine Driven Chiller Driveline Heat Exchanger - Clean
Gas Engine Driven Chiller Driveline Pneumatic Drum Clutch - Inspect
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
3306B Industrial Engine Engine Oil Pressure
3304B and 3306B Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C-12 Truck Engine Cooling System
P16, P20, P25, P28, P40 and P60 Pulverizers Rotator Motor
3306C Engines for Caterpillar Built Machines Fuel Filter Base
3306B Industrial Engine Overhaul Considerations
3406E On-Highway Engine Valve Mechanism Cover - Remove and Install
3306B Industrial Engine Engine Oil Pan