Axle Oil Cooler - Remove and Install
Show/hide table
Item | Part Number | Part Description | Qty |
A | 463-3380 | Belly Guard Lift Table | 1 |
- Drain the coolant. Remove to "Operation and Maintenance Manual", Cooling System Coolant (ELC) - Change for the correct draining procedure.
Show/hide table
Illustration 1 g06249542 Show/hide tableDo not lower the bottom guard while under the machine. Injury could occur if the bottom guard slips off of the jack while it is being lowered.
- The axle oil cooler is located under bottom guard (1). Remove bottom guard (1). Refer to Disassembly and Assembly"Bottom Guard - Remove and Install".
Show/hide table
Illustration 2 g06250547 - Disconnect connectors (3). Disconnect hose assemblies (2). Disconnect hose assemblies (4).
Show/hide table
Illustration 3 g06251214 - Remove tube assemblies (5).
Show/hide table
Illustration 4 g06251270 - Remove bolts (7), the washers, and axle oil cooler (9). Remove bolts (6), the washers, and axle oil cooler (8).
Show/hide table
Illustration 5 g06251274 - Remove bolts (10) and the washers. Remove axle oil cooler (8). Repeat for axle oil cooler (9).
- Install axle oil cooler (8) and axle oil cooler (9) in the reverse order of removal.
Caterpillar Information System:
Certain Cat® Product Link Assets are Unable to Unsubscribe in Dealer Service Portal (DSP) {7606} Certain Cat® Product Link Assets are Unable to Unsubscribe in Dealer Service Portal (DSP) {7606}
RM500B Reclaimer Mixer Machine Systems Position Sensor (Rotor Depth) - Calibrate
A New Troubleshooting Procedure Is Now Available for the Seat Belt Retraction on Certain Backhoe Loaders {7324, 7336} A New Troubleshooting Procedure Is Now Available for the Seat Belt Retraction on Certain Backhoe Loaders {7324, 7336}
Routing of the Steering Lines Group and Air Conditioner Lines Group is Now Improved on Certain 794 AC Off-Highway Trucks {1808, 4304} Routing of the Steering Lines Group and Air Conditioner Lines Group is Now Improved on Certain 794 AC Off-Highway Trucks {1808, 4304}
Procedure to Improve Retention of Steering Lines Group on Certain 794 AC Off-Highway Trucks {1808, 4304} Procedure to Improve Retention of Steering Lines Group on Certain 794 AC Off-Highway Trucks {1808, 4304}
MD6200 Rotary Drill Drill Pipe - Add and Remove
986K Wheel Loader Capacities (Refill)
C11 and C15 Engines for Caterpillar Built Machines CID 0261 FMI 11 Engine Timing Offset fault
986K Wheel Loader Additional Messages
Cat® Command for Dozing, Operator Console, Commissioning Guide for D8T Track-Type Tractors {1408, 7008, 7605, 7610, 7620} Cat® Command for Dozing, Operator Console, Commissioning Guide for D8T Track-Type Tractors {1408, 7008, 7605, 7610, 7620}
PG145 Transmission Modulating Valve (Torque Converter Lockup Clutch)
MD6200 Rotary Drill Fire Extinguisher Location
The 357-9456 Bolts (Lifter Shaft Bolts) May Fail on Certain C175 Machine Engines {1000, 1209} The 357-9456 Bolts (Lifter Shaft Bolts) May Fail on Certain C175 Machine Engines {1000, 1209}
994K Wheel Loader Systems Control Valve
986K Wheel Loader Battery Disconnect Switch
Cleaning the Solenoid Valve Group May Increase the Performance for the Fan Control on Certain Telehandlers {1387} Cleaning the Solenoid Valve Group May Increase the Performance for the Fan Control on Certain Telehandlers {1387}
Improved Torque Specifications for the Hose Fittings at the Priority Valve Manifold and Valve Block are Now Used on Certain TL1055D and TL1255D Telehandlers {5057} Improved Torque Specifications for the Hose Fittings at the Priority Valve Manifold and Valve Block are Now Used on Certain TL1055D and TL1255D Telehandlers {5057}
559D and 579D Knuckleboom Loader Machine Systems Stabilizer Cylinder - Remove and Install
Procedure to Install New Lower Fuel Filter Support Bracket for Certain C175 Engines {1261, 1262} Procedure to Install New Lower Fuel Filter Support Bracket for Certain C175 Engines {1261, 1262}
Updated Front Valve Bank Covers are Now Available for Certain 12M3, 140M3, and 160M3 Motor Graders {7167} Updated Front Valve Bank Covers are Now Available for Certain 12M3, 140M3, and 160M3 Motor Graders {7167}
New Seal Kit in the Control Valve Group Is Now Available on Certain Backhoe Loaders {5051} New Seal Kit in the Control Valve Group Is Now Available on Certain Backhoe Loaders {5051}
986K Wheel Loader Operator Controls
12K, 120K, 140K and 160K Motor Graders Power Train Tandem - Check
Harsh Directional Shift Performance on Certain Motor Graders {7000} Harsh Directional Shift Performance on Certain Motor Graders {7000}