MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Caterpillar


Pulverizer Jaw

Usage:

MP345 JZD


Illustration 1g06243597

Table 1
Item  Qty  Part  Specification Description 
503-7364 Pin  Coat the bore for the pin with black 5P-0960 Grease Cartridge. 
As required, use the following shim rings in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower jaw. Total shims should be evenly distributes between upper jaw and lower jaw: 
369-4516 Ring Shim  Thickness of one shim is 3.00 ± 0.15 mm (0.118 ± 0.006 inch)
369-4514 Ring Shim  Thickness of one shim is 2.0 mm (0.08 inch) 
173-1687 Shim  Thickness of one shim is 5.00 ± 0.15 mm (0.196 ± 0.006 inch) 
369-4515 Ring Shim  Thickness of one shim is 2.50 ± 0.15 mm (0.098 ± 0.006 inch) 
As required, use the following shim plates in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower: 
463-3827 Shim Plate  Thickness of one shim is 1.0 mm (0.04 inch)
463-3828 Shim Plate  Thickness of one shim is 1.5 mm (0.06 inch)
7Q-8323 Bolt  Torque to 520 ± 70 N·m (384 ± 52 lb ft)
459-7330 Pin  Coat the bore for the pin with black 5P-0960 Grease Cartridge. 
10  459-7333 Nut  Use the following procedure in order to tighten the nut:

1. Tighten the nut to 300 ± 50 N·m (221 ± 37 lb ft).
2. Backoff the nut until the nearest set of holes is aligned. 
11  8T-8441 Bolt  Before assembly, apply blue Loctite 243 to the threads. 
12  8T-5042 Bolt  Torque to 520 ± 70 N·m (384 ± 52 lb ft)
13  459-7332 Pin  Coat the bore for the pin with black 5P-0960 Grease Cartridge. 

Caterpillar Information System:

An Assembly Improvement Has Been Made to Increase Bolt Retention and Reliability of the Output Transfer Gear Differential Group on Certain Articulated Trucks {3159} An Assembly Improvement Has Been Made to Increase Bolt Retention and Reliability of the Output Transfer Gear Differential Group on Certain Articulated Trucks {3159}
785G Off-Highway Truck Machines Systems Air Horn - Remove and Install
785G Off-Highway Truck Oil Filter (Brake Charge) - Replace
797F and 797F XQ Off-Highway Trucks Machine Systems Accumulator (Steering) - Disassemble
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Combination Jaw - Crusher
988K XE Wheel Loader Systems Exhaust Lines
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Exhaust Lines
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Hydraulic Tank
Diesel Exhaust Fluid (DEF) Quality Sensor Updates on Certain C7.1 Engines {108H, 108U, 1439, 7620} Diesel Exhaust Fluid (DEF) Quality Sensor Updates on Certain C7.1 Engines {108H, 108U, 1439, 7620}
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Fuel Tank
The A/C Lines Group is Improved on Certain 794 AC Off-Highway Trucks {1808, 7320} The A/C Lines Group is Improved on Certain 794 AC Off-Highway Trucks {1808, 7320}
785G Off-Highway Truck Brake System Oil Sample - Obtain
Cab Doors May Not Open from the Outside on Certain Telehandlers {7308} Cab Doors May Not Open from the Outside on Certain Telehandlers {7308}
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Pressure Reducing Valve - Bottom Guard
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Pressure Reducing Valve
2384D 2484D Knuckle Boom Loader Additional Messages
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems STIC Control
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Joystick Control
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Relief Valve - Reversing Fan
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Keypad Module
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Accumulator Charging Valve (Brake)
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)
Diesel Exhaust Fluid (DEF) Manifold on Certain C3.4B and C4.4 Engines {108K, 3206} Diesel Exhaust Fluid (DEF) Manifold on Certain C3.4B and C4.4 Engines {108K, 3206}
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Main Control Valve - Mounting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.