Belt Tensioner
Show/hide table
Illustration 1 | g01437844 |
Use the following procedure in order to adjust the belt tensioner:
- Remove the belt so that there is no tension on the belt tensioner.
- Align the thick black line on 134-1018 Film (1) with shoulder (2) of the tensioner's arm (3) .
- Install the belt. Shoulder (2) should be in the green zone of 134-1018 Film (1) .
Caterpillar Information System:
3406E and 3456 Industrial Engines Alternator
3176C and 3196 Industrial Engines Water Temperature Regulator
3176C and 3196 Industrial Engines Engine Oil Pan
3406E and 3456 Industrial Engines Gear Group (Rear)
3176C and 3196 Industrial Engines Engine Oil Pan
3406E and 3456 Industrial Engines Flywheel
3612 and 3616 Fast Vessel Engines Engine Operation
3500 and 3500B Engines Starting with Jump Start Cables
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Pressure
3500B Locomotive Engines Starting the Engine
C-10 and C-12 Truck Engines Camshaft
C-10 and C-12 Truck Engines Camshaft
C-10 and C-12 Truck Engines Belt Tensioner
C-10 and C-12 Industrial Engines Belt Tightener
3176C and 3196 Industrial Engines Coolant Conditioner Base
3406E and 3456 Industrial Engines Electric Starting Motor
3034 Engine for Caterpillar Built Machines Lubrication System
3176C and 3196 Industrial Engines Cylinder Block
3034 Engine for Caterpillar Built Machines Cooling System
3408C and 3412C Marine Engines Air Starting Motor
3406E and 3456 Industrial Engines Air Starting Motor Pressure Regulating Valve
3500B Locomotive Engines Electric Starting Motor
3034 Engine for Caterpillar Built Machines Electrical System
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Liner Projection