Cylinder Head Valves
Show/hide table
| |
| Illustration 1 | g06060221 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 4 | 450-0908 Spring | Length under test force is Test force is Free length after test is |
| 2 | 4 | 450-0909 Spring | Length under test force is Test force is Free length after test is |
| 3 | 2 | 449-7115 Valve Stem Seal | Install the valve stem seal to the inlet valves. |
| 4 | 2 | 449-7116 Valve Stem Seal | Install the valve stem seal to the exhaust valves. |
| A | - | - | Height from the top of the cylinder head to the top of the valve guides is |
| 5 | 2 | 449-7118 Valve Guide | Bore of the exhaust valve guide after installation is |
| 6 | 2 | 449-7117 Valve Guide | Bore of the inlet valve guide after installation is |
| 7 | 2 | 498-1593 Exhaust Valve | Before assembly, coat the exhaust valve stems with clean engine oil.
Stem diameter (B) is Valve diameter (D) is Face angle is 45.60 ± 0.25 degrees. |
| 8 | 2 | 498-1592 Inlet Valve | Before assembly, coat the inlet valve stems with clean engine oil.
Stem diameter (C) is Valve diameter (E) is Face angle is 19.40 ± 0.25 degrees. |
| 9 | 2 | 456-0411 Valve Seat | Diameter of exhaust valve seat insert is Bore in the cylinder head is Face angle is 45.00 ± 0.25 degrees. |
| 10 | 2 | 480-7205 Valve Seat | Diameter of inlet valve seat insert is Bore in the cylinder head is Face angle is 20.00 ± 0.25 degrees. |
Caterpillar Information System:
Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U} Engine Shutdown Procedure on Certain C4.4 Machine Engines {108I, 108U}
Engine Shutdown Procedure on Certain C4.4 Engines {108I} Engine Shutdown Procedure on Certain C4.4 Engines {108I}
3516 Engines 994K Wheel Loader Fuel Injection Pump
785G Off-Highway Truck Machines Systems Steering Tank and Filter - Disassemble
Instructions for Sorting and Replacing HVAC Actuators {1800, 7320} Instructions for Sorting and Replacing HVAC Actuators {1800, 7320}
740 Ejector Articulated Truck Ejector Manifold
New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453} New One Piece Starter Housing is Used on Certain 824K, 825K, and 826K Machines {1453}
740 Ejector Articulated Truck Piston Pump (Steering, Ejector)
Pump Group (HPU) 524-5342 (460 V/60 Hz/3 Phase), 524-5343 (230 V/60 Hz/3 Phase), 524-5344 (415 V/50 Hz/3 Phase), 524-5345 (380 V/50 Hz/3 Phase), 524-5346 (600 V/60Hz/3 Phase) {0374, 0599, 0700, 0738} Pump Group (HPU) 524-5342 (460 V/60 Hz/3 Phase), 524-5343 (230 V/60 Hz/3 Phase), 524-5344 (415 V/50 Hz/3 Phase), 524-5345 (380 V/50 Hz/3 Phase), 524-5346 (600 V/60Hz/3 Phase) {0374, 0599, 0700, 0738}
A New Accumulator Warning Plate is Now Used With The Front Service Brake Accumulator of Certain 700 C-Series Articulated Trucks {7405, 7557, 7563} A New Accumulator Warning Plate is Now Used With The Front Service Brake Accumulator of Certain 700 C-Series Articulated Trucks {7405, 7557, 7563}
785G Off-Highway Truck Systems Air Cleaner
3516 Engines 994K Wheel Loader Turbocharger
3516 Engines 994K Wheel Loader Exhaust Manifold
785G OFF-HIGHWAY TRUCK Engine Supplement Suction Screen (Oil Pan) - Remove and Install
986K Wheel Loader Steering Cylinder Bearings - Lubricate
740 Ejector Articulated Truck Piston Pump (Steering, Ejector) - Test and Adjust
An Improved Metering Steer Pump is Now Used on Certain AP300D Asphalt Pavers {4303, 4304, 4312} An Improved Metering Steer Pump is Now Used on Certain AP300D Asphalt Pavers {4303, 4304, 4312}
F Series Paver Communication Network Guide {7000} F Series Paver Communication Network Guide {7000}
Installation of the 530-2463 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133} Installation of the 530-2463 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133}
740 Ejector Articulated Truck Piston Pump (Brake, Ejector, Fan) - Test and Adjust
A New Hitch Group is Now Available for certain 24M Machines {7057, 7100} A New Hitch Group is Now Available for certain 24M Machines {7057, 7100}
An Improved Draft Ball Is Now Available for Certain Motor Graders {6153} An Improved Draft Ball Is Now Available for Certain Motor Graders {6153}
An Improved Worm Drive Gear Is Now Available For Certain 16H, 16M, 16M3, 18M3, 24H, and 24M Motor Graders {5207} An Improved Worm Drive Gear Is Now Available For Certain 16H, 16M, 16M3, 18M3, 24H, and 24M Motor Graders {5207}
14L Motor Grader Service Brake (Wheel Spindle) - Assemble