Final Drive
Show/hide table
| |
| Illustration 1 | g06200909 |
|
Final Drive (Front, Center, and Rear Axle) (1) Wheel (2) Ring gear (3) Planetary carrier (4) Spindle (5) Axle shaft (6) Sun gear (7) Hub (8) Gear (9) Wheel bearings (10) Seals (11) Service Brake Group | |
Planetary final drives are used on all axles.
Ring gear (2) is mounted on hub (7). The hub is splined onto spindle (4). Spindle (4) is bolted to the axle housing. Ring gear (2) is held stationary.
Gears (8) are mounted upon planetary carrier (3) which is bolted to wheel (1). Sun gear (6) is splined to axle shaft (5).
Drive comes to sun gear (6) through axle shaft (5). Ring gear (2) is held stationary, so the planetary carrier is driven in the same direction as the sun gear at a reduced speed. The carrier is bolted to the wheel and the wheel rotates on bearings (9).
The final drive is lubricated by oil from the axle. Seals (10) allow the oil to be sealed in the final drive and the axle.
Caterpillar Information System:
745 & 740 GC Articulated Truck Differential (Front and Rear Axle)
745 & 740 GC Articulated Truck Differential (Center Axle)
745 & 740 GC Articulated Truck Traction Control System - Automatic Traction Control System Operation
745 & 740 GC Articulated Truck Automatic Retarder Control (ARC)
745 & 740 GC Articulated Truck Transmission Planetary
745 & 740 GC Articulated Truck Relief Valve (Transmission Hydraulic Control) - Electronic Main Relief Valve EMRV
745 & 740 GC Articulated Truck Oil Filter (Transmission)
745 & 740 GC Articulated Truck Oil Cooler (Transmission)
745 & 740 GC Articulated Truck Transmission Hydraulic Control
745 & 740 GC Articulated Truck Transfer Gears - Output Transfer Gears (OTG)
745 & 740 GC Articulated Truck Transfer Gear Lubrication System
745 & 740 GC Articulated Truck Torque Converter
559D and 579D Knuckleboom Loaders Relief Valve (Line) - Test and Adjust
Procedure to Improve Sealing on the Track Adjusting System Is Now Available for Certain D6K2 Track-Type Tractors, and PL61 Pipelayers {4158} Procedure to Improve Sealing on the Track Adjusting System Is Now Available for Certain D6K2 Track-Type Tractors, and PL61 Pipelayers {4158}
Improved Pressure Sensors for the Suspension Cylinders are Now Available on Certain Off-Highway Trucks {1408, 1439, 7200, 7201} Improved Pressure Sensors for the Suspension Cylinders are Now Available on Certain Off-Highway Trucks {1408, 1439, 7200, 7201}
785G Off-Highway Truck Systems Limit Switch (Truck Body Up) - Adjust
Pressure Reducing Valve May Generate Noise on Certain Backhoe Loaders {5467, 5479} Pressure Reducing Valve May Generate Noise on Certain Backhoe Loaders {5467, 5479}
777D and 777E Off-Highway Truck Tire and Rim (Front) - Remove and Install
16M Series 3 and 18M Series 3 Motor Graders Additional Messages - Only Japanese Market
Improved Braking Capability for the Front Wheel Braking System is Now Available on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4265, 4282, 5479, 7490, 7610, 7620} Improved Braking Capability for the Front Wheel Braking System is Now Available on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4265, 4282, 5479, 7490, 7610, 7620}
Procedure to Improve the Braking Capability for the Front Wheel Braking System on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4265, 4282, 5479, 7490, 7610, 7620} Procedure to Improve the Braking Capability for the Front Wheel Braking System on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4265, 4282, 5479, 7490, 7610, 7620}
An Improved Duct Assembly Is Now Available For Certain Motor Graders {7320} An Improved Duct Assembly Is Now Available For Certain Motor Graders {7320}
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Contains Oil
C175 Tier 4 Final Engines for Off-Highway Trucks Crankcase Pressure Is High