Solenoid Valve (Transmission) - Remove and Install
Start By:
- Release the system pressure.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| |
| Illustration 1 | g06180763 |
Show/hide table
| |
| Illustration 2 | g06180790 |
Show/hide table
| |
| Illustration 3 | g06180799 |
Show/hide table
| |
| Illustration 4 | g06223004 |
Show/hide table
| |
| Illustration 5 | g06180840 |
- Install the solenoid valve in the reverse order of removal.
Show/hide table
Table 1 Specification for final drive planetary (Rear) Part Name Step Sub Step Specification Bolt 4 2 Torque to 8 ± 1 N.m (71 ± 9 lb in) .Screw 3 1 Torque to 10 ± 2 N.m (89 ± 18 lb in) .Screw 1 1 Torque to 9 ± 1 N.m (80 ± 9 lb in) .
Caterpillar Information System:
426F2 Backhoe Loader Power Train Final Drive Planetary - Remove and Install - Rear
426F2 Backhoe Loader Power Train Steering Cylinder (Front) - Remove and Install - 2WD
C9.3B Engines Coolant Temperature Sensor
793F Off-Highway Truck Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
426F2 Back Hoe Loader Machine System Cab - Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Drive Sprocket
784C and 785C Off-Highway Truck/Tractors Suspension Head (Front) - Inspect
797F Off-Highway Truck Field Assembly Cooling System Package - Install - High Altitude
C13, C15, and C18 Generator Set Engines CID 1922 FMI 06 Intake Valve Actuation System Oil Pressure Solenoid Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1922 FMI 05 Intake Valve Actuation System Oil Pressure Solenoid Current Below Normal
3512E Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
773E Off-Highway Truck Machine Systems Electronic Control Module (Payload) - Remove and Install
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) General Information (Propel System) - Solid Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) Operator Controls (Propel System) - Solid Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) Propel System Components - Solid Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) Shift Valve - Solid Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) Piston Pump (Propel) - Solid Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) Piston Motor (Propel) - Solid Drum
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Aftertreatment SCR System Dosing - Test
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) Electrical Schematic (Propel System) - Solid Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) Hydraulic Schematic (Propel System) - Solid Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Split Drum) General Information (Propel System) - Split Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Split Drum) Operator Controls (Propel System) - Split Drum
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Split Drum) Propel System Components - Split Drum