Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks is Available {4304} Caterpillar


Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks is Available {4304}

Usage:

745C OEM JE8
Articulated Truck
735C (S/N: LFJ1-254; TFJ1-261)
740C EJECTOR (S/N: LFN1-276; TFN1-189)
745C (S/N: JE81-90118; JE91-102; LFK1-982; TFK1-1548)

Reference: Special Instruction, M0078488, "Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks"

A Special Instruction is available to provide the procedure to install updated steering lines and service brake plate - accumulator for Certain 700 C-Series Articulated Trucks.

The Special Instruction can be found on the Caterpillar Service Information System (SIS) and through the normal literature distribution system at your local Cat dealer. For the complete list of parts and procedure to install the updated steering lines and service brake plate - accumulator, refer to Special Instruction, M0078488, "Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks".

Caterpillar Information System:

CB7, CB8, and CB10 Vibratory Asphalt Compactors Pivot Bearing (Compaction Measurement Mounting) - Replace - If Equipped
426F2 Back Hoe Loader Machine System Fuel Tank - Remove and Install
PM310, PM312, and PM313 Cold Planers Electronic System Diagnostic Capabilities
PM310, PM312, and PM313 Cold Planers Electronic System Connector Locations
PM310, PM312, and PM313 Cold Planers Electronic System Service Tools
A Special Instruction Is Now Available to Install the Adjustable Body Heat Exhaust Design for Certain 735C, 745C, and 740C Ejector {1061, 1062} A Special Instruction Is Now Available to Install the Adjustable Body Heat Exhaust Design for Certain 735C, 745C, and 740C Ejector {1061, 1062}
PM310, PM312, and PM313 Cold Planers Electronic System General Information
PM310, PM312, and PM313 Cold Planers Electronic System Electrical Output Components
PM310, PM312, and PM313 Cold Planers Electronic System Electronic Control Module (ECM)
PM310, PM312, and PM313 Cold Planers Electronic System Electrical Input Components
PM310, PM312, and PM313 Cold Planers Electronic System Location of Electrical Components
422F2, 426F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Axles, Differential and Brakes Axle (Front) - Adjust
CB1.7 and CB1.8 Compactors TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565} CB1.7 and CB1.8 Compactors TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565}
R1700 Load Haul Dump Cab Door Latch Sensor - Inspect/Adjust
AP1000F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP1000F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP1055F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP1055F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP600F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP600F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP600F and AP655F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP600F and AP655F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP500F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP500F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP555F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP555F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
PM620 and PM622 Cold Planer TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} PM620 and PM622 Cold Planer TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
CW34 Pneumatic Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} CW34 Pneumatic Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
C13, C15, and C18 Generator Set Engines CID 1901 FMI 06 Intake Valve Actuator #1 Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1902 FMI 05 Intake Valve Actuator #2 Current Below Normal
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.