426F2 Back Hoe Loader Machine System Caterpillar


Fuel Tank - Remove and Install

Usage:

426 F2 DJ4

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
463-3380  Lift As 

  1. Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain" and Operation and Maintenance Manual, "Capacities (Refill)" for the correct draining and filling procedures.


Illustration 1g06171787


Illustration 2g06171806


Illustration 3g06171979


Illustration 4g06172096

Installation Procedure

  1. Install the fuel tank in the reverse order of removal.

Caterpillar Information System:

PM310, PM312, and PM313 Cold Planers Electronic System Diagnostic Capabilities
PM310, PM312, and PM313 Cold Planers Electronic System Connector Locations
PM310, PM312, and PM313 Cold Planers Electronic System Service Tools
A Special Instruction Is Now Available to Install the Adjustable Body Heat Exhaust Design for Certain 735C, 745C, and 740C Ejector {1061, 1062} A Special Instruction Is Now Available to Install the Adjustable Body Heat Exhaust Design for Certain 735C, 745C, and 740C Ejector {1061, 1062}
PM310, PM312, and PM313 Cold Planers Electronic System General Information
PM310, PM312, and PM313 Cold Planers Electronic System Electrical Output Components
PM310, PM312, and PM313 Cold Planers Electronic System Electronic Control Module (ECM)
PM310, PM312, and PM313 Cold Planers Electronic System Electrical Input Components
PM310, PM312, and PM313 Cold Planers Electronic System Location of Electrical Components
422F2, 426F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Axles, Differential and Brakes Axle (Front) - Adjust
725 and 730 Articulated Trucks Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
426F2 Back Hoe Loader Machine System Counterweight - Remove and Install
CB7, CB8, and CB10 Vibratory Asphalt Compactors Pivot Bearing (Compaction Measurement Mounting) - Replace - If Equipped
Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks is Available {4304} Procedure to Install Updated Steering Lines and Service Brake Plate - Accumulator for Certain 700 C-Series Articulated Trucks is Available {4304}
CB1.7 and CB1.8 Compactors TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565} CB1.7 and CB1.8 Compactors TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565}
R1700 Load Haul Dump Cab Door Latch Sensor - Inspect/Adjust
AP1000F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP1000F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP1055F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP1055F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP600F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP600F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP600F and AP655F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP600F and AP655F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP500F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP500F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP555F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} AP555F Asphalt Pavers TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
PM620 and PM622 Cold Planer TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} PM620 and PM622 Cold Planer TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
CW34 Pneumatic Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} CW34 Pneumatic Compactor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.