Turbocharger
S3B
Show/hide table
Illustration 1 | g00325011 |
(1) End play for the new shaft ... 0.102 ± 0.025 mm (.004 ± .001 inch)
Apply 5P-3931 Anti-Seize Compound on all of the threads of the nuts. Torque for bolts and nuts that hold the turbocharger to the exhaust manifold ... 55 ± 5 N·m (40 ± 4 lb ft)
Install the band clamps that hold the cartridge to the compressor housing, as follows:
Tighten the clamps to the following torque. ... 14 ± 1.1 N·m (125 ± 10 lb in)
Gently tap around the clamp.
Tighten the clamps again to the following torque. ... 14 ± 1.1 N·m (125 ± 10 lb in)
Note: Put clean engine oil in the oil inlet of the turbocharger after assembly or before installation in order to provide lubrication during start-up and/or storage protection.
Caterpillar Information System:
3306C Truck Engine Exhaust Extension
3408B and 3412C Generator Set Engines Cooling System
3306B Industrial Engine Exhaust Manifold
3306C Engines for Caterpillar Built Machines Housing (Front)
3408B and 3412C Generator Set Engines Cooling System
3512B Oil Well Servicing Engines Flywheel Housing Cover
3306B Industrial Engine Lubrication System
3306C Truck Engine Gear Group (Front)
3306C Engines for Caterpillar Built Machines Automatic Timing Advance Unit
3500 Generator Sets Engine Crankcase Breather - Clean
Installation Of Energized Seals On 3600 High Performance Aftercoolers{1063} Installation Of Energized Seals On 3600 High Performance Aftercoolers{1063}
3306C Truck Engine Fuel Filter Base
3408B and 3412C Generator Set Engines Fuel System
3508, 3512, and 3516 Generator Sets Cooling System Coolant (DEAC) - Change
3306B Industrial Engine Engine Oil Filter Base
G3612 and G3616 Engines Status Control Module Service Procedure
3508, 3512, and 3516 Generator Sets Cooling System Coolant (ELC) - Change
Electronic Modular Control Panel II (EMCP II) For MUI Engines Relay Driver Module
3306C Engines for Caterpillar Built Machines Valve Mechanism Cover
3408B and 3412C Generator Set Engines Air Inlet and Exhaust System
3508B, 3512B, and 3516B High Displacement Generator Sets Alarms and Shutoffs
3508, 3512, and 3516 Generator Sets Control Panel
3408B and 3412C Generator Set Engines Electrical System
PM3500 Power Modules Engine Oil and Filter - Change