A New Body Mounting Pad Assembly is Now Available for Certain 777D Off-Highway Trucks {7258}
- Quarry Truck
- 777D (S/N: FKR1-UP)
Description Of Change: A new body mounting pad assembly is now available for the machines listed above. The new pad assembly consists of an EPDM rubber pad that is more resistant to the engine exhaust temperature.
The new pad assembly improves the service life of the right side body mounting pad assembly on trucks equipped with the body heat exhaust arrangement.
Adaptable To:
Show/hide table
| |
| Illustration 1 | g06087383 |
New 376-7790 Pad As (1) is an optional replacement for 229-6177 Pad As in 299-3569 Truck Body Mounting Gp and 321-0046 Truck Body Mounting Gp.
New pad assembly (1) can be used in any combination with 229-6177 Pad As and can be used with any exhaust arrangement option.
New pad assembly (1) is adaptable to the machines S/N:FKR1-UP.
Caterpillar Information System:
A New Grease Fitting for the Main Drive Shaft Slip Joint is Now Used on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {0645, 3251, 3253} A New Grease Fitting for the Main Drive Shaft Slip Joint is Now Used on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {0645, 3251, 3253}
986K Wheel Loader Lifting and Tying Down the Machine
CS54B, CP54B and CS64B Vibratory Soil Compactor Propel System Parking Brake - Test
C175-16 Locomotive Engine Fuel Transfer Pump
14M3 Motor Grader Machine Systems Articulation Cylinder
14M3 Motor Grader Machine Systems Axle Mounting
CCS9 Combination Compactor Lubricant Viscosities - Fluids Recommendations
CS54B, CP54B and CS64B Vibratory Soil Compactor Propel System Pump Synchronization - Test and Adjust
815K Soil Compactor and 816K Landfill Compactor Accumulator (Brake) - Test and Charge
2570D, 2670D Wheel Feller Buncher Cooling System Coolant Extender (ELC) - Add
950M, 962M, 950M Z and 962M Z Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Assemble
14M3 Motor Grader Machine Systems Steering Cylinder
Hose Assembly Instructions for MH3022 and MH3024 Material Handlers, and F-Series Wheeled Excavators {1355, 1380} Hose Assembly Instructions for MH3022 and MH3024 Material Handlers, and F-Series Wheeled Excavators {1355, 1380}
986K Wheel Loader Backup Alarm - Test
986K Wheel Loader Backup Alarm
New Deformed Thread Lock Nuts for Belly Pan Bolts are Now Available for Certain Large Off-Highway Trucks {7150, 7153} New Deformed Thread Lock Nuts for Belly Pan Bolts are Now Available for Certain Large Off-Highway Trucks {7150, 7153}
An Improved Engine Harness Assembly Is Used on Certain C175 Off-Highway Truck Engines {1408} An Improved Engine Harness Assembly Is Used on Certain C175 Off-Highway Truck Engines {1408}
A New Plate Assembly is Now Used in the Water Lines Group on Certain 770G and 772G Off-Highway Trucks {1380} A New Plate Assembly is Now Used in the Water Lines Group on Certain 770G and 772G Off-Highway Trucks {1380}
Installation Procedure for the Cat® Detect Object Detection and Vision Systems for Quarry, Off-Highway and Mining Truck Applications {7610, 7620} Installation Procedure for the Cat® Detect Object Detection and Vision Systems for Quarry, Off-Highway and Mining Truck Applications {7610, 7620}
773E Off-Highway Truck Belts - Inspect/Adjust/Replace
Over Torquing of the Quill Tube Bolts May Contribute to Issues with Injector Sleeve Leaks in the C175 Engines Installed in Caterpillar Large Mining Trucks {1100, 1103, 1105, 1106, 1124, 1125, 1254, 1290, 1713} Over Torquing of the Quill Tube Bolts May Contribute to Issues with Injector Sleeve Leaks in the C175 Engines Installed in Caterpillar Large Mining Trucks {1100, 1103, 1105, 1106, 1124, 1125, 1254, 1290, 1713}
C3.8 Engines for Caterpillar Built Machines Electric Starting System - Test
New Software Is Used On Certain 120M Series 2 and 12M Motor Graders {7620} New Software Is Used On Certain 120M Series 2 and 12M Motor Graders {7620}
Intermittent Operation Of Tamper In Auto Mode On Certain Series SE Screeds {7000} Intermittent Operation Of Tamper In Auto Mode On Certain Series SE Screeds {7000}