815K, 816K Soil Compactor Machine Systems Caterpillar


Main Control Valve - Disassemble

Usage:

816K LT6

Disassembly Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.


Start By:

a. Remove the main control valve.



    Illustration 1g06078910

  1. Remove nuts (1).


    Illustration 2g06078920

  2. Separate valve banks.


    Illustration 3g06078974

    Note: Mark location of o-rings.

  3. Remove screws (4).

  4. Remove cover (3) and valve (2).

Caterpillar Information System:

Procedure to Install the Sensor Harness on Certain CB54B and CD54B Compactors {4351, 5058} Procedure to Install the Sensor Harness on Certain CB54B and CD54B Compactors {4351, 5058}
® for Dozing, Semi-Autonomous Tractor System (SATS) and Operator Station Event Codes
New Clamps are Now Used on the Fuel Tanks of Certain Motor Graders {1273} New Clamps are Now Used on the Fuel Tanks of Certain Motor Graders {1273}
MH3037 Material Handler Engine Supplement Air Cleaner - Remove and Install
The Plugs May Fall Out of the Slope Jacks on Certain SE Series Screeds {5639, 5641} The Plugs May Fall Out of the Slope Jacks on Certain SE Series Screeds {5639, 5641}
773E Off-Highway Truck Jacking Locations
745 Articulated Truck Radiator Core - Clean
AP355F Asphalt Paver Propel Systems Propel System Troubleshooting
® for Dozing, Semi-Autonomous Tractor System (SATS) and Operator Station Diagnostic Trouble Codes
815K Soil Compactor and 816K Landfill Compactor Systems Air Cleaner
AP355F Asphalt Paver Propel Systems Visual Inspection
New Transmission Software Is Now Used on Certain C Series Articulated Trucks {3030, 4800, 4801, 7490, 7610, 7620} New Transmission Software Is Now Used on Certain C Series Articulated Trucks {3030, 4800, 4801, 7490, 7610, 7620}
815K, 816K Soil Compactor Machine Systems Main Control Valve - Assemble
The Oil Cooler Group May Fail on Certain 773G and 775G Off-Highway Trucks {1351, 1365, 1366, 1374, 1375, 5102} The Oil Cooler Group May Fail on Certain 773G and 775G Off-Highway Trucks {1351, 1365, 1366, 1374, 1375, 5102}
730 & 735 Articulated Truck Cab Air Filter - Clean/Replace
777G Off-Highway Truck Seat
815K, 816K Compactor Engine Supplement Water Pump - Remove and Install
770G and 772G Off-Highway Truck Seat
770G and 772G Off-Highway Truck Seat
730 & 735 Articulated Truck Automatic Lubrication Grease Tank - Fill - If Equipped
Installation of the 493-7657 Engine XQ Conversion Kit For Certain 797F Machine Engines {1000, 1152, 1201, 1302, 795C} Installation of the 493-7657 Engine XQ Conversion Kit For Certain 797F Machine Engines {1000, 1152, 1201, 1302, 795C}
A New Joystick Control Group is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5705} A New Joystick Control Group is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5705}
Lift Arm May Allow Extra Free Play on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054} Lift Arm May Allow Extra Free Play on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054}
Cat® Command For Hauling Over Detection of Obstacles
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.