16M3 and 18M3 Motor Graders Information Display Caterpillar

To access features and to view and adjust display settings, press the "Display" button (1) on the right side of the display. The Display page will appear.

Illustration 1	g03825781
(1) Display button

Screen Brightness

Display > Screen Brightness

Illustration 2	g03825793
(2) Screen Brightness button (3) BACK button

Illustration 3	g03834591
The Day/Sun icon (4) will appear on the screen when the machine's work lights are ON. The Night/Moon icon (5) will appear on the screen when the machine's work lights are OFF. (4) Day/Sun icon (5) Night/Moon icon (6) Increment/Decrement bar

1. Press the "Display" button (1) on the right side of the Display. The "Display" menu page will appear.

2. Press "Screen Brightness" button (2). The "Screen Brightness" button will highlight in yellow and the "Brightness" settings page will appear.

3. To adjust the brightness of the display, press either end of the Increment Bar (6).

   1. Press the (+) button on the right end of the Increment/Decrement bar to increase the brightness of the display.

   2. Press the (-) button on the left end of the Increment/Decrement bar to decrease the brightness of the display.

4. Press the BACK button (3) to return to the previous menu.

Language Selection

Display > Language

View all display values in a preferred language by changing the Display "Language" settings.

Illustration 4	g03825921
(7) Language button (8) OK button

1. Press the "Display" button on the right side of the Display. The Display menu page will appear.

2. Press the "Language" button (7). The "Language" button will highlight in yellow and the Language settings page will appear.

3. Press the desired language button and the button will highlight in yellow. Press the "OK" button (8) to set.

Units Selection

Display > Units

View parameter values in preferred units by changing the Display "Units" settings. Selection of preferred Units is limited to English and Metric.

Illustration 5	g03833953
(9) Units button

1. Press the "Display" button (1) on the right side of the Display. The Display menu page will appear.

2. Press the "Units" button (9). The "Units" button will highlight in yellow and the "Units" settings page will appear.

3. Press "English" or "Metric". Press "OK" (8) to set.

   The Display will convert the system values to the unit selected and add the appropriate Unit abbreviation for each value.

4. Press the BACK button (3) to return to the previous menu.

Auto Night Mode

Display > Auto Night Mode

Enabling the Auto Night Mode will automatically adjust the Day/Night mode based on the status of the work lights.

Note: The Auto Night Mode can still be overridden by pressing the Display's Day/Night button.

Illustration 6	g03825945
(10) Auto Night Mode button (11) Day/Night button

1. Press the "Display" button (1) on the right side of the Display. The Display menu page will appear.

2. Press the "Auto Night Mode" button (10). The Auto Night Mode button will highlight in yellow and the Auto Night Mode settings page will appear.

3. Press "Enabled" or "Disabled". Press "OK" (8) to set.

4. Press the BACK button (3) to return to the previous menu.

Software License Information

Display > Software License Info

Illustration 7	g03825953
(12) Software License Info button (13) Scroll Bar (14) DOWN button

1. Press the "Display" button (1) on the right side of the Display. The Display menu page will appear.

2. Press the "Software License Info" button (12). The Software License Info button will highlight in yellow and the Software License will appear.

3. Use the Scroll Bar (13) or press the DOWN arrow button (14) to read the Software License Agreement.

4. Press the BACK button (3) to return to the previous menu.