3176C and 3196 Marine Engines Caterpillar

Cylinder Liner Projection

Usage:

3196 2XR

Show/hide table

Table 1
Specifications
Liner Projection	0.040 to 0.200 mm (0.0016 to 0.0079 inch)
Maximum Variation in Each Liner	0.050 mm (0.0020 inch)
Maximum Average Variation Between Adjacent Liners	0.050 mm (0.0020 inch)
Maximum Variation Between All Liners	0.100 mm (0.0040 inch)

Note: Refer to the Systems Operation/Testing and Adjusting manual for more information on the cylinder liner projection.

Caterpillar Information System:

3176C and 3196 Industrial Engines Cylinder Liner

3176C and 3196 Industrial Engines Cylinder Liner

3054 and 3056 Industrial and Generator Set Engines Cold Weather Starting

3176C and 3196 Marine Engines Cylinder Block

G3612 and G3616 Engines Valve Mechanism

3612 and 3616 Engines Vibration Damper - Single

3608 Engine Aftercooler

3612 and 3616 Engines Connecting Rod and Main Bearing Journals

3406E Truck Engine Engine Design

3176C and 3196 Industrial Engines Gauges and Indicators

3508, 3512, and 3516 Generator Sets Product Storage

3456 Generator Sets Generator Set Lifting

3406E Truck Engines Cylinder Head

3176C and 3196 Marine Engines Piston and Rings

3306B Industrial Engine Engine Warm-up

3176C Engine Connecting Rod

3054 and 3056 Industrial and Generator Set Engines Engaging the Driven Equipment

3054 and 3056 Industrial and Generator Set Engines Manual Stop Procedure

G3304 and G3306 Engines Belt Tension Chart

3406E Truck Engine Cylinder Block

3176C and 3196 Marine Engines Turbocharger Outlet Pressure Sensor

3176C and 3196 Industrial Engines Speed/Timing Sensor

3208 Marine Engine Fuel Related Components in Cold Weather

3406E Truck Engine Engine Design