Improved Routing of Fuel Hoses on Certain Skid Steers and Compact Track Loaders {1274} Caterpillar


Improved Routing of Fuel Hoses on Certain Skid Steers and Compact Track Loaders {1274}

Usage:

239D BL9
Compact Track Loader
239D (S/N: BL91-UP)
249D (S/N: GWR1-UP)
Skid Steer Loader
226D (S/N: HRD1-UP)
232D (S/N: DPR1-UP)

Description Of Change: The following improvements were implemented to provide better protection of fuel hoses routed to the fuel cooler on rear door.

Adaptable To:



Illustration 1g06024765
(A) 10°
(1) 132-5789 Clip
(2) 160-2243 Abrasion Sleeve
(3) 3S-2093 Cable Strap
(5) 7K-1181 Cable Strap

Install 416-6043 Abrasion Sleeve (or 152.4 mm (6 inch) of 160-2243 Abrasion Sleeve) (2) around hoses. Use two 3S-2093 Cable Strap (3), angle P-clip on frame down 10 degrees (A) from horizontal and replace P-clip on door with 132-5789 Clip (1) and 7K-1181 Cable Strap (5). Refer to Illustration 1.

Table 1
Required Parts 
Item  Qty  Part Number  Description 
132-5789  Clip 
152.4 mm (6 inch)  160-2243  Abrasion Sleeve 
3S-2093  Cable Strap 
229 cm (90.2 inch)  5P-1507  Hose(1) 
7K-1181  Cable Strap 
(1) If necessary
The improved routing of fuel hoses is adaptable to the following machines:

  • 226D HRD1-224

  • 232D DPR1-199

  • 239D BL91-218

  • 249D GWR1-212
The improved routing of fuel hoses is effective in production on the following machines:

  • 226D HRD225-UP

  • 232D DPR200-UP

  • 239D BL9219-UP

  • 249D GWR213-UP

Caterpillar Information System:

Improved Bank 2 Valve Group is Now Used in Certain 424B Backhoe Loaders {5051} Improved Bank 2 Valve Group is Now Used in Certain 424B Backhoe Loaders {5051}
AP655F and AP655F L Asphalt Pavers Propel Systems Hydraulic Schematic (Propel System)
Improved Bank 6 Valve Group is Now Used in Certain 424B Backhoe Loaders {5051} Improved Bank 6 Valve Group is Now Used in Certain 424B Backhoe Loaders {5051}
AP655F and AP655F L Asphalt Pavers Propel Systems Electrical Schematic (Propel System)
AP655F and AP655F L Asphalt Pavers Propel Systems Final Drive Planetary
New Procedure to Reroute Speed Sensor Harness on Multi-Terrain Loaders {4803} New Procedure to Reroute Speed Sensor Harness on Multi-Terrain Loaders {4803}
AP655F and AP655F L Asphalt Pavers Propel Systems Piston Motor (Propel)
AP655F and AP655F L Asphalt Pavers Propel Systems Piston Pump (Propel)
AP655F and AP655F L Asphalt Pavers Propel Systems Location of Hydraulic Components (Propel System)
AP655F and AP655F L Asphalt Pavers Propel Systems Location of Electrical Components (Propel System)
AP655F and AP655F L Asphalt Pavers Propel Systems Operator Controls (Propel System)
AP655F and AP655F L Asphalt Pavers Propel Systems General Information (Propel System)
Lock Group Rework on Certain CW34 Pneumatic Roller {7253} Lock Group Rework on Certain CW34 Pneumatic Roller {7253}
538, 548 and 558 Forest Machine System Schematic
New Serviceable Linkage Group is Now Used on Certain Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {6129} New Serviceable Linkage Group is Now Used on Certain Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {6129}
The Main Frame is Improved for the 785D Off-Highway Truck {0679, 7051} The Main Frame is Improved for the 785D Off-Highway Truck {0679, 7051}
CW16 Pneumatic Compactor Propel System Parking Brake - Test - Release Pressure
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101} {0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
The Assembly Procedure for the Wiper Motor Assembly has been Improved on Certain Motor Graders {7305} The Assembly Procedure for the Wiper Motor Assembly has been Improved on Certain Motor Graders {7305}
CW16 Pneumatic Compactor Propel System Brake - Calibrate
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803} New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
CW34 Pneumatic Compactor Machine System Operator Controls (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Location of Components (Emulsion Spray System)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.