3176C and 3196 Industrial Engines Caterpillar


Customer Specified Parameters

Usage:

3196 1DW
To record programmed specifications, use the following blanks.

Customer Passwords

  • First Password ____________________

  • Second Password ____________________

Power Rating (hp at rpm) ____________________

Rating Selection (A-E) ____________________

Air/Fuel Ratio

  • Level 1: Minimal Smoke ____________________

  • Level 2: Optimum Performance ____________________

  • Level 3: Maximum Acceleration ____________________

PTO Governor Parameters

  • PTO Engine Speed Ramp Rate ____________________ rpm/sec

Engine Parameters

  • Top Engine Limit (TEL) at 100 percent load (If Applicable) ____________________

  • Torque Limit ____________________

  • High Idle (If Applicable) ____________________

  • Low Idle ____________________

  • Intermediate Speed ____________________

Engine Monitoring Mode

  • "OFF" ____________________

  • "Warning" ____________________

  • "Warning/Derate" ____________________

  • "Warning/Derate/Shutdown" ____________________

  • "Coolant Level Sensor Enable/Disable" ____________________

  • "Fuel Pressure Sensor Enable/Disable" ____________________

  • "Inlet Manifold Air Temperature Sensor Enable/Disable" ____________________

Equipment ID

Maintenance Indicator

  • Manual-Hours

  • Auto-Hours

  • Manual-Fuel

  • Auto-Fuel

Auxiliary Pressure

  • High Warning Set Point ____________________

Auxiliary Temperature

  • High Warning Set Point ____________________

Caterpillar Information System:

3176C and 3196 Industrial Engines Engine Description
3176C and 3196 Industrial Engines Model View Illustrations
3126E and 3126B Commercial and Truck Engines Electrical System
3406C Engines for Caterpillar Built Machines Electric Starting Motor
3306C Engines for Caterpillar Built Machines Belt Tension Chart
3408E and 3412E Engines for Caterpillar Built Machines Alternator and Regulator
3176C and 3196 Industrial Engines Safety Signs and Labels
3306B Industrial Engine Severe Service Application - Check
3500B Engines for Caterpillar Built Power Modules Balancer Group (Front)
345B Excavator Engine Air Precleaner - Clean
3500B Engines for Caterpillar Built Power Modules Housing (Front)
345B Excavator Swing Drive Oil Level - Check
3500B Engines for Caterpillar Built Power Modules Engine Speed/Timing Sensor
3306B Industrial Engine Engine Lifting
3126 Truck Engine (Military) Product Storage
3176C and 3196 Industrial Engines Refill Capacities
3176C and 3196 Industrial Engines Sensors and Electrical Components
3500B Engines for Caterpillar Built Power Modules Engine Oil Pump
3500B Engines for Caterpillar Built Power Modules Gear Group (Front)
3500B Engines for Caterpillar Built Power Modules Cylinder Liner
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Connecting Rod and Main Bearing Journals
3176C and 3196 Industrial Engines Diagnostic Flash Code Retrieval
3176C and 3196 Industrial Engines Customer Specified Parameters
3500B Engines for Caterpillar Built Power Modules Crankcase Pressure Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.