CB7 and CB10 Vibratory Asphalt Compactors Engine Supplement Caterpillar

Removal Procedure

Start By:

1. Remove the cab.

2. Remove the expansion tank.

3. Remove the air cleaner.

1. Turn the battery disconnect switch to the OFF position.

2. Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
   Show/hide table

   Illustration 1	g06229755

3. Attach Tooling (A) and a suitable lifting device to engine enclosure group (1). The weight of engine enclosure group (1) is approximately 68 kg (150 lb).

4. Remove the bolts and engine enclosure group (1).
   Show/hide table

   Illustration 2	g06229763

5. Disconnect hoses (2) and hose (3).
   Show/hide table

   Illustration 3	g06229791

6. Disconnect three hose assemblies (5) and harness assembly (6) from fan motor (4).
   Show/hide table

   Illustration 4	g03177226

7. Remove the bolts and shroud (7).
   Show/hide table

   Illustration 5	g03177227

8. Disconnect hoses (8).
   Show/hide table

   Illustration 6	g03177231

9. Cut cable strap (9). Disconnect fuel lines (10).
   Show/hide table

   Illustration 7	g03177235

10. Disconnect mount (11).
    Show/hide table

    Illustration 8	g06229793

    Show/hide table

    Illustration 9	g03177240

11. Attach Tooling (A) and a suitable lifting device to radiator, hydraulic oil cooler, air cooler, and fuel filter (14). The weight of radiator, hydraulic oil cooler, air cooler, and fuel filter (14) is approximately 159 kg (350 lb).

12. Remove four bolts (12).

13. Remove mounting bolts (13). Repeat for the opposite side.

14. Remove radiator, hydraulic oil cooler, air cooler, and fuel filter (14).

Installation Procedure

1. Install radiator, hydraulic oil cooler, air cooler, and fuel filter (14) in the reverse order of removal.