M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Caterpillar

Removal Procedure

1. Park the machine on a flat, level surface. Rotate the upper frame 90 degrees from the undercarriage frame.
   Show/hide table

   Illustration 1	g03863381

2. Cut cable straps (1) and disconnect harness assembly (2).
   Show/hide table

   Illustration 2	g03863391

3. Cut cable strap (3) and disconnect harness assembly (4).
   Show/hide table

   Illustration 3	g03863420

   Show/hide table

   Illustration 4	g03863421

4. Remove screws (5). Reposition signal lamp group (6).

5. Disconnect harness assembly (7). Remove signal lamp group (6).

6. Repeat Steps 4 and 5 for the signal lamp group on the opposite side.
   Show/hide table

   Illustration 5	g03863440

   Show/hide table

   Illustration 6	g03863442

7. Attach Tooling (A) and a suitable lifting device to remove counterweight (8). The weight of counterweight (8) is approximately 4173 kg (9200 lb).

8. Remove bolts (9) and counterweight (8).

Installation Procedure

1. Install counterweight (8) in the reverse order of removal.