CP44B and CS44B Vibratory Soil Compactors Machine Systems Caterpillar


Hydraulic Cylinder (Leveling Blade) - Remove and Install

Usage:

CS44B 4G3

拆卸步骤

------ WARNING! ------

滚热的油或液压油的压力会对人员造成伤害。

发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。

卸下液压系统的部件或管路时,确保所有的作业机具都已降到地面上,而且液压油温度已冷。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。


------ WARNING! ------

配备锁止阀的油缸即使在软管拆卸后也会长时间保持高压状态。

如果拆卸锁止阀或解体油缸之前没有释放所有压力,则可能会导致人身伤亡。

拆卸锁止阀或解体油缸之前确保释放所有压力。



注意

在检验、保养、测试、调整及维修机器时,务必小心,确保用容器盛接流出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器,请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。

根据当地法规处置所有液体。




    图 1g01986073

  1. 拆下螺栓 (1),并将软管组件 (2) 从找平铲刀油缸 (3) 上断开。


    图 2g01986075

  2. 拆下螺栓 (4),并将找平铲刀油缸 (3) 从找平铲刀 (5) 上拆下。

安装步骤

  1. 按与拆卸相反的顺序安装找平铲刀油缸 (3)。

    1. 将螺栓 (4) 拧紧至扭矩为 400 ± 50 N·m (295 ± 37 lb ft)

    2. 将螺栓 (1) 拧紧至扭矩为 400 ± 50 N·m (295 ± 37 lb ft)

Caterpillar Information System:

MSS3s Machine Security System Software - Uninstall - "Immobilizer" Feature
MD6200 Rotary Drill Drill Bit - Remove and Install
PL72 Pipelayers Power Train Torque Converter Outlet Relief Valve - Remove and Install
MSS3s Machine Security System ECM - Configure
AP500F Asphalt Paver Propel System Piston Pump Neutral - Test and Adjust - Right Propel
CP44B and CS44B Vibratory Soil Compactors Machine Systems Control Valve (Leveling Blade) - Assemble
MSS3s Machine Security System Glossary of Terms
CP44B and CS44B Vibratory Soil Compactors Machine Systems Control Valve (Leveling Blade) - Disassemble
PL83 and PL87 Pipelayer Systems Piston Pump (Fan Drive)
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801} Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
PL72, PL83 and PL87 Pipelayers Solenoid Return - Test
PL72 Pipelayers Power Train Final Drive - Remove and Install - Right and Left Side
MSS3s Machine Security System Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System Wiring Harness (Short Circuit) - Test
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Fan - Remove and Install
MSS3s Machine Security System Connector Locations
MSS3s Machine Security System Machine Preparation for Troubleshooting
MSS3s Machine Security System Connector Contact Description
CP44B and CS44B Vibratory Soil Compactors Machine Systems Leveling Blade - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Gear Motor (Fan Drive) - Remove and Install
PL72 Pipelayers Power Train Main Drive Shaft - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Counterweight - Remove and Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Center Axle - Remove and Install
PL72 Pipelayers Machine Systems Ladder - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.