Improved Air Line Hose Is Now Used on Certain 988K, 834K, and 836K {1063, 1071} Caterpillar


Improved Air Line Hose Is Now Used on Certain 988K, 834K, and 836K {1063, 1071}

Usage:

988K TWX
Landfill Compactor
836K (S/N: TWZ1-UP)
Wheel Dozer
834K (S/N: TWY1-UP)
Wheel Loader
988K (S/N: TWX1-UP)
Service Magazine, SEPD2062, 25, September 2015, "Improved Air Line Hose Is Now Used on Certain 988K, 834K, and 836K". Disregard this article. The correct information follows.

Description Of Change: An improved hose material with higher strength and heat resistance is now used on certain 834K Wheel Dozer, 836K Landfill Compactor, and 988K Wheel Loaders.

Adaptable To: The new 486-8459 Hose replaces the former 368-2846 hose. See rework procedure below.

This change is effective with and adaptable to the following machines:

Table 1
Effectivity 
Model  Adaptable to  Effective with 
834K  S/N:TWY1-703  S/N:TWY704-UP 
836K  S/N:TWZ1-540  S/N:TWZ541-UP 
988K  S/N:TWX1-792  S/N:TWX793-UP 

Rework Procedure



Illustration 1g03864299
Location of hose
(1) 486-8459 Hose

  1. Remove former hose that routes between the turbo to the CRS system. Retain hardware for reuse.

  2. Install new 486-8459 Hose (1) in the location of the former hose using the retained hardware.

Caterpillar Information System:

PL72 Pipelayers Machine Systems Fairlead Sheave - Remove and Install
AP500F Asphalt Paver Propel System Piston Pump Neutral - Test and Adjust - Left Propel
794 AC Off-Highway Truck Field Assembly Air Conditioner Lines - Install
CCS7 Combination Vibratory Compactors Machine Systems Control Valve (Shift) - Remove and Install
PL72 Pipelayers Machine Systems Ladder - Remove and Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Center Axle - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Counterweight - Remove and Install
PL72 Pipelayers Power Train Main Drive Shaft - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Gear Motor (Fan Drive) - Remove and Install
CP44B and CS44B Vibratory Soil Compactors Machine Systems Leveling Blade - Remove and Install
MSS3s Machine Security System Connector Contact Description
MSS3s Machine Security System Machine Preparation for Troubleshooting
794 AC Off-Highway Truck Field Assembly Lighting - Install
777D and 777E Off-Highway Truck Hydraulic System Hoist Cylinder Mounting
777E and 777F Off-Highway Truck Power Train Oil Filter (Transmission Charging)
777E and 777F Off-Highway Truck Power Train Bypass Switch (Transmission Charging Oil Filter)
777E and 777F Off-Highway Truck Power Train Relief Valve (Pilot Control Pressure)
777D and 777E Off-Highway Truck Air System and Brakes Air/Hydraulic Cylinder (Front Caliper)
777D and 777E Off-Highway Truck Air System and Brakes Air Control Valve (Retarder)
PL72 Pipelayers Machine Systems Boom Sheave Block (Upper) - Remove and Install
777D and 777E Off-Highway Truck Air System and Brakes Gear Pump (Pulled Unit)
PL83 and PL87 Pipelayer Systems Modes of Operation (Steering System)
794 AC Off-Highway Truck Field Assembly Tire and Rim - Install
16M Series 3 and 18M Series 3 Motor Grader Drive Chain - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.