New Pinouts For Water In Fuel Harness (WIF) Connector When New Engine Ratings Electronic Software Gp Is Installed on Certain Wheel Feller Buncher{1408, 7490, 7610, 7620}
- Wheel Feller Buncher:
- 2470C (S/N: W2M1-307; W471-104)
- 2570C (S/N: F1B1-216; W571-107)
- 2670C (S/N: W671-112)
- 553C (S/N: PGR1-277; W531-119)
- 563C (S/N: JCB1-324; W631-156)
- 573C (S/N: RJT1-296; W731-134)
- 2570C (S/N: F1B1-216; W571-107)
When installing new Engine Ratings Electronic Software Gp if the Water in Fuel error appears, change the existing WIF sensor harness pinouts. The pinouts will be at 281-8803 Connector Plug As to new pinouts as shown in Table 2.
Show/hide table
| Exiting Harness Connection | |||
| AMP | CONNECTOR TABLE | A-C11 | |
| CLR-GA | Wire Name | Position | Term/Plug |
| OR-18 | A700-A51 | 1 | 8T-8730 |
| YL-18 | C984-A34 | 2 | 8T-8730 |
| PK-18 | G939-A54 | 3 | 8T-8730 |
| ACCESSORY TABLE | |||
| Quantity | Part Name | Part Number | |
| 1 | Connector Plug As | 281-8803 | |
Show/hide table
| New Harness Connection | |||
| AMP | CONNECTOR TABLE | A-C11 | |
| CLR-GA | Wire Name | Position | Term/Plug |
| YL-18 | C984-A34 | 1 | 8T-8730 |
| PK-18 | G939-A5A | 2 | 8T-8730 |
| OR-18 | A700-A51 | 3 | 8T-8730 |
| ACCESSORY TABLE | |||
| Quantity | Part Name | Part Number | |
| 1 | Connector Plug As | 281-8803 | |
Caterpillar Information System:
773E Off-Highway Truck Air System and Brakes Pressure Sensor (Air System)
773E Off-Highway Truck Air System and Brakes Pressure Switch (Stop Light)
773E Off-Highway Truck Air System and Brakes Solenoid Valve (Automatic Retarder Control)
777D and 777E Off-Highway Truck Steering System Pump Control Valve
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Boom Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Boom Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Relief Valve
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Window Guard
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Walkway
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Quick Coupler Lock
777D and 777E Off-Highway Truck Steering System Hydraulic Tank (Steering)
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Quick Coupler Lock
2015/08/05 A New Pinout Configuration Has Been Approved For Use on The Water In Fuel Sensor (WIF) Harness Connector on Certain Wheel Feller Bunchers {1408, 7490, 7610, 7620}
Installing the 484-8211 Battery Disconnect Kit {1411} Installing the 484-8211 Battery Disconnect Kit {1411}
16M Series 3 and 18M Series 3 Motor Grader Machine Preparation
CW34 Pneumatic Compactor Machine Electronic Control System Diagnostic Trouble Codes
777D and 777E Off-Highway Truck Air System and Brakes Gear Pump (Torque Converter Charging, Scavenge, and Parking Brake Release)
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Fan Guard - Remove and Install
CP44B and CS44B Vibratory Soil Compactors Machine Systems Control Valve (Leveling Blade) - Remove and Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Differential and Bevel Gear (Front and Rear) - Remove and Install
MSS3s Machine Security System ECM Software - Install
MSS3s Machine Security System ECM - Replace
CW34 Pneumatic Compactor Machine Electronic Control System Determining Diagnostic Trouble Codes
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Gear Motor (Fan Drive) - Disassemble