Blower Motor (Air Conditioner and Heater) - Remove and Install
Start By:
- Remove the storage box and covers.
- Disconnect harness assemblies (2) and (3). Disconnect harness assembly (6) from clips (4). Remove bolts (1) and position support assembly (5) and harness assembly (6) to the side.
Show/hide table
Illustration 2 g01213565 - Remove cover (7).
Show/hide table
Illustration 3 g01213566 - Loosen bolts (8). Disconnect harness assembly (10). Remove bolts (11) and blower motor (9).
Show/hide table
Illustration 1 | g01213562 |
- Install blower motor (9). Install bolts (11). Connect harness assembly (10). Tighten bolts (8).
Show/hide table
Illustration 5 g01213565 - Install cover (7).
Show/hide table
Illustration 6 g01213562 - Position support assembly (5) and harness assembly (6). Install bolts (1). Connect harness assembly (6) onto clips (4). Connect harness assembly (3) and (2).
Show/hide table
Illustration 4 | g01213566 |
Caterpillar Information System:
RM500B Reclaimer Mixer Power Train Relief Valve (Charge Pressure, Left Propel Pump) - Test and Adjust
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Calibration Using Electronic Service Tool
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 General Information (Calibration)
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Simple Calibration
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Calibration Using Display Module
416F2, 420F2 and 430F2 Backhoe Loaders Lubricant Viscosities - Fluids Recommendations
Instructions For Installing A Heat Shield For The Battery And Circuit Box On Certain 16M Motor Graders{7513} Instructions For Installing A Heat Shield For The Battery And Circuit Box On Certain 16M Motor Graders{7513}
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil Sample (Rear) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil Sample (Front) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil Level (Rear) - Check
416F2, 420F2 and 430F2 Backhoe Loaders Differential Oil Level (Front) - Check
MH3037 Material Handler Machine Systems Receiver Dryer (Refrigerant) - Remove and Install
735C and 745C Articulated Trucks Machine Systems Secondary Steering System
PL72 Pipelayer Power Train System Oil And Screens - Change/Clean
773G and 775G Off-Highway Trucks Maintenance Interval Schedule
773G and 775G OEM Off-Highway Truck Chassis Maintenance Interval Schedule
MH3037 Material Handler Machine Systems Heating and Air Conditioning Unit - Remove and Install
RM500B Reclaimer Mixer Power Train Case Drain Pressure for Piston Motor (Propel) - Test
Reuse and Salvage Guideline for Unit Rig Mining Truck Hydraulic Steering Cylinders{0374, 0599, 0732, 4303} Reuse and Salvage Guideline for Unit Rig Mining Truck Hydraulic Steering Cylinders{0374, 0599, 0732, 4303}
PM310, PM312, and PM313 Cold Planer Track Information
MH3037 Material Handler Machine Systems Refrigerant Condenser - Remove and Install
MH3037 Material Handler Machine Systems Storage Box and Covers (Cab) - Remove and Install
MH3037 Material Handler Engine Supplement Hood - Remove and Install
MH3037 Material Handler Machine Systems Seat Suspension - Remove and Install